Updated Nov 21, 2026· 10 min read

Our Top Picks

  1. Makita B-65399 Impact Gold 14 Pc. Titanium Drill14-Piece4.9 x 6.3 x 2.1 Inches1.05 Pounds
    Check on Amazon
  2. DEWALT Drill Bit SetOne Size8.75 x 1.38 x 8.75 inches1 pounds
    Check on Amazon

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

A twist drill bit is the bit most workshops reach for first. Its helical flutes pull chips out of the hole as it turns, its point centers itself on a punch mark, and one set covers pilot holes, clearance holes, dowel holes, and clean bores through softwood, hardwood, plywood, plastic, and light metal. The five sets below are all twist bits, also called jobber bits, and nothing else: no step bits, no spade bits, no brad-point bits, no masonry bits, and no cobalt bits, because each of those is a different tool for a different job.

Our top pick: DEWALT 21-Pc Titanium Nitride Pilot Point DW1361. Runner-up: DEWALT 14-Pc Titanium Nitride DW1354.

Three of the five sets here carry the DEWALT name, which says more about how thoroughly that brand covers the jobber-bit shelf than about any shortage of alternatives. The IRWIN set earns its place with the widest size range in the group, and the Makita set is the only one built for an impact driver. Read the point angle and the shank type on each set before you choose: those two details decide whether a bit works in your drill at all.

As an Amazon Associate, we earn from qualifying purchases.

Sections
  1. Quick Answer
  2. 1. DEWALT 21-Pc Titanium Nitride Pilot Point DW1361
  3. 2. DEWALT 14-Pc Titanium Nitride DW1354
  4. 3. IRWIN 29-Pc HSS 3018005
  5. 4. Makita Impact Gold 14-Pc B-65399
  6. 5. DEWALT 21-Pc Black & Gold DWA1181
  7. How to Choose Twist Drill Bits
  8. Who Should Skip This
  9. Frequently Asked Questions
  10. Final Verdict
  11. Product and ASIN Reference

Quick Answer

The DEWALT DW1361 21-piece titanium nitride set is the best twist drill bit set for most workshops: its pilot-point tip bites without wandering and its 21 sizes cover nearly every everyday hole. Choose the IRWIN 29-piece set for the finest size steps, the Makita Impact Gold set for an impact driver, and the DEWALT DWA1181 set as a second full-size set in black oxide.

1. DEWALT 21-Pc Titanium Nitride Pilot Point DW1361

The DW1361 is the strongest set in this group and the one to buy first. Its 21 bits run from 1/16 inch to 1/2 inch, covering pilot holes for small screws up to clearance holes for half-inch bolts. The titanium nitride coating gives the cutting edges a hard gold surface that holds an edge longer than bare high-speed steel, and the pilot-point tip centers the bit on a punch mark so it does not skate.

This set suits a workshop that drills wood most days and metal or plastic the rest. The pilot point matters most in wood, pulling the bit into the grain in a straight line instead of letting the tip wander across a hard growth ring. The bits sit in a lockable storage case that keeps the sizes in order, so a missing size is obvious after a job. It is the number one bestseller in the Jobber Drill Bits category.

Specs

    • Pieces: 21, sizes 1/16 inch to 1/2 inch
    • Material: high-speed steel with titanium nitride coating
    • Point: pilot-point tip
    • Shank: straight shank
    • Case: lockable storage case
    • Model: DW1361

    2. DEWALT 14-Pc Titanium Nitride DW1354

    The DW1354 is the smaller sibling of the top pick, for when a 21-piece set is more than you need. Its 14 bits cover the same 1/16 inch to 1/2 inch range with fewer intermediate sizes and the same titanium nitride coating. The 135-degree split point is the key feature: the split tip cuts at two points, keeping the bit centered and lowering the pressure needed to feed it.

    In metal and hardwoods, a plain point can wander or need a heavy push to bite; the split point cuts as soon as it touches the surface, and the hole stays where you marked it. The ToughCase is a compact latched case that fits in a tool bag without the bits rattling loose. This set suits a woodworker who owns a larger set and wants a lighter kit for the bench, or a homeowner who drills a few holes a week rather than a few dozen a day.

    Specs

      • Pieces: 14, sizes 1/16 inch to 1/2 inch
      • Material: high-speed steel with titanium nitride coating
      • Point: 135-degree split point
      • Shank: straight shank
      • Case: ToughCase
      • Model: DW1354

      3. IRWIN 29-Pc HSS 3018005

      The IRWIN 3018005 is the set to buy when size steps matter. Its 29 bits run from 1/16 inch to 1/2 inch in 1/64-inch steps, the finest graduation in this group. That matters when a dowel or a bolt needs a hole that is exactly right: with 1/64-inch steps you match the hole to the fastener instead of settling for the nearest size in a coarser set.

      The bits are black oxide high-speed steel, a finish that resists corrosion and reduces friction as the bit turns. The 135-degree split point keeps the bit centered, and the metal index case holds every bit in a labeled slot, so the set doubles as its own organizer. The steel case suits a shop where cases get dropped and stacked. This set suits a woodworker who drills dowel joints, a metalworker who taps holes, or anyone who has wished for a size between two sizes in a 21-piece set. With no coating to extend edge life, expect to sharpen or replace the most-used sizes sooner than on the DEWALT sets.

      Specs

        • Pieces: 29, sizes 1/16 inch to 1/2 inch in 1/64-inch steps
        • Material: black oxide high-speed steel
        • Point: 135-degree split point
        • Shank: straight shank
        • Case: metal index case
        • Model: 3018005

        4. Makita Impact Gold 14-Pc B-65399

        The Makita B-65399 is the only set here built for an impact driver, and that single fact decides whether it belongs in your kit. Its bits have a 1/4-inch hex shank that locks into an impact driver or a quick-change chuck, and the steel is rated for the hammering action that would crack or snap a round-shank bit. If you drive screws with an impact driver all day, this is the bit set that matches it.

        The 14 bits cover the everyday range, and the split-point tip keeps each hole centered. The titanium coating adds wear resistance, and the hex shank also fits a standard drill chuck, so the set still works in a drill driver when the impact driver is charging. This set suits a carpenter or installer who works mostly with an impact driver, or anyone who wants one set that moves between an impact driver and a drill without changing bits. It has the freshest availability signal in the group, with a recent in-stock listing at a deal tracker and a retailer listing showing it available.

        Specs

          • Pieces: 14
          • Material: high-speed steel with titanium coating
          • Point: split-point tip
          • Shank: 1/4-inch hex shank, impact-rated
          • Case: storage case
          • Model: B-65399

          5. DEWALT 21-Pc Black & Gold DWA1181

          The DWA1181 is the second full-size DEWALT set in this group, the black oxide alternative to the titanium-coated top pick. Its 21 bits run from 1/16 inch to 1/2 inch, and the black and gold oxide coating resists corrosion while the 135-degree split point keeps the bit centered. The 31-degree helix and parabolic flutes clear chips fast, which matters most in deep holes in metal or hardwood, where packed chips slow the cut and heat the bit.

          This set suits a workshop that already owns a titanium set and wants a second full set for a second drill, or a buyer who prefers black oxide and does not mind sharpening bits a little sooner. The sizes match the DW1361 piece for piece, so the two sets can share a case layout. One honest flag: this is the weakest evidence in the group. The code appears in the listing address rather than in the listing text on the main marketplace, and the most recent crawl of the listing is 269 days old. The identity is confirmed — the listing names the DWA1181 model and the matching UPC, a deal tracker lists current offers for the same model, and an independent roundup links the same code to the same set — but confirm the listing is live before ordering.

          Specs

            • Pieces: 21, sizes 1/16 inch to 1/2 inch
            • Material: black oxide high-speed steel, black and gold coating
            • Point: 135-degree split point
            • Helix: 31-degree helix with parabolic flutes
            • Shank: straight shank
            • Case: organized plastic carrying case
            • Model: DWA1181

            How to Choose Twist Drill Bits

            First, the material. High-speed steel is the base for every set here. A titanium nitride coating adds a hard surface that holds an edge longer, which pays off when you drill metal often. Black oxide resists corrosion and costs less to make, which suits wood-first workshops.

            Next, the point. A pilot point centers itself and pulls the bit straight into wood, which is why the DW1361 leads this group. A 135-degree split point cuts at two points and needs less feed pressure, which suits metal and hardwoods. A plain 118-degree point is the general-purpose shape, but none of the five sets here uses it.

            Then match the shank to your tool. A straight shank fits any drill chuck, which covers four of the five sets here. A 1/4-inch hex shank fits an impact driver and a quick-change chuck, which is the Makita set alone. Never put a round-shank bit in an impact driver: the chuck cannot grip it, and the hammering action can damage the bit.

            Then count the sizes. A 21-piece set covers the common holes with sensible steps. A 29-piece set with 1/64-inch steps covers the holes in between, which matters for dowels and tapped threads. A 14-piece set covers the same range with fewer steps, which is fine for clearance and pilot holes rather than precision fits. Finally, look at the case: a case that holds each bit in a labeled slot saves more time than any coating, and steel index cases survive drops while latched plastic cases keep bits from spilling in a tool bag.

            Who Should Skip This

            Skip these sets if you need holes in brick, block, or concrete. Twist bits are built for wood, metal, and plastic, and masonry needs carbide-tipped masonry bits with a hammer drill. Skip them too if you need wide, fast holes through framing for cables or pipes: a spade bit bores those holes far faster than any twist bit can. For flat-bottomed holes, a Forstner bit is the right tool, and for clean entry holes in thin veneer, a brad-point bit beats a twist bit. Step bits cover holes in thin sheet metal, where a twist bit would grab and tear.

            Frequently Asked Questions

            What is the difference between a twist bit and a brad-point bit?

            A twist bit has a helical flute and a pointed or split tip that works in wood, metal, and plastic. A brad-point bit has a sharp center spur and two cutting spurs that score the wood before the flutes cut, leaving a cleaner entry hole in veneer and visible surfaces. Use a brad-point bit when the entry hole will show, and a twist bit for everything else.

            Can I use twist bits in an impact driver?

            Only the bits made for it. The Makita set here has a 1/4-inch hex shank and steel rated for impact use, so it fits an impact driver. Round-shank bits belong in a drill driver chuck. An impact driver cannot grip a round shank, and the hammering action can snap a bit that was not built for it.

            What point angle should I choose, 118 degrees or 135 degrees?

            A 135-degree split point is the better choice for most work in this group. It centers itself, needs less feed pressure, and cuts cleanly in metal and hardwoods. A 118-degree point is the older general-purpose shape and still works, but it wanders more when a hole first opens.

            Do titanium-coated bits last longer than black oxide bits?

            In metal, yes. The titanium nitride coating is harder than the steel beneath it, so the cutting edge holds its shape through more holes before it dulls. In wood, the difference is smaller, because wood dulls bits slowly and a sharp black oxide bit cuts just as cleanly. Choose titanium for metal-heavy work, black oxide for wood-first work.

            Final Verdict

            The DEWALT DW1361 is the best twist drill bit set for most workshops: a full 21-piece range, a titanium nitride coating, and a pilot-point tip that puts each hole exactly where you marked it. The IRWIN 29-piece set is the pick for fine size steps, the Makita Impact Gold set is the pick for impact drivers, and the DEWALT DWA1181 is a solid second full set in black oxide. Three of the five sets are DEWALT, and that concentration is worth knowing, but each set here earned its place on what it does, not on whose name is printed on the case.

            Product and ASIN Reference

            Product ASIN
            DEWALT 21-Pc Titanium Nitride Pilot Point DW1361 B004GIO0F8
            DEWALT 14-Pc Titanium Nitride DW1354 B0045PQ762
            IRWIN 29-Pc HSS 3018005 B000EB891W
            Makita Impact Gold 14-Pc B-65399 B07HSKJGYT
            DEWALT 21-Pc Black & Gold DWA1181 B079VJMH6T
            C
            Carpenter's Equip Editorial Team
            We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
            Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
            Best Twist Drill Bits for Wood and General…Check price on Amazon

            Related guides

            Browse all Equipment guides →

            More from Amazon

            Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

            Amazon Business

            A free business account with business pricing and bulk-buying tools for work, shop or home office.

            Create a business account
            Amazon Prime

            Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

            Start a Prime free trial
            Audible

            Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

            Try Audible free
            Amazon Music Unlimited

            Ad-free music streaming. Eligible new subscribers can start with a free trial.

            Try Music Unlimited free

            As an Amazon Associate we earn from qualifying purchases.