Updated Nov 21, 2026· 10 min read

Key takeaways

  • Find the best masonry drill bits for brick and concrete at home. Carbide-tipped bits that drill clean holes in brick, block and concrete with ease.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

Hanging a shelf on a brick wall or mounting a hose reel on concrete block all comes down to one small tool: the drill bit. A standard twist bit skates across hard masonry, dulls fast, and leaves a ragged hole. A carbide-tipped masonry bit cuts a clean, round hole and keeps its edge through brick, block, and concrete. This guide covers five carbide-tipped masonry bit sets for home use, all with straight or hex shanks for a standard drill chuck or a hammer drill — no SDS bits, no power tools, only the bits themselves.

Our top pick: DEWALT DW5207 7-Piece Percussion Masonry Drill Bit Set. Runner-up: Bosch BM5000 14-Piece Fast Spiral Rotary Masonry Bit Set.

As an Amazon Associate, we earn from qualifying purchases.

Sections
  1. Quick Answer
  2. How to Choose Masonry Drill Bits
  3. 1. DEWALT DW5207 7-Piece Percussion Masonry Drill Bit Set
  4. 2. Bosch BM5000 14-Piece Fast Spiral Rotary Masonry Bit Set
  5. 3. SKIL MDB5000 10-Piece Hex Shank Carbide Hammer Drill Bit Set
  6. 4. Milwaukee Shockwave 7-Piece Carbide Hammer Drill Bit Kit 48-20-9052
  7. 5. Bosch HCBG700 7-Piece Blue Granite Turbo Carbide Hammer Drill Bit Set
  8. Who Should Skip Masonry Drill Bit Sets
  9. FAQ
  10. Final Verdict
  11. Product and ASIN Reference

Quick Answer

For most home jobs, the DEWALT DW5207 7-piece set is the pick to buy first: carbide tips, a 3-flat shank that resists slipping, and sizes from 1/8 inch to 1/2 inch for common anchors. The Bosch BM5000 14-piece set is the better choice when you want more sizes on hand.

How to Choose Masonry Drill Bits

Carbide tip. The cutting edge is a carbide insert brazed onto a steel body. Carbide is far harder than the steel in twist bits, which is why it grinds through brick, block, and concrete instead of skating across the surface. Retire a bit once the carbide edge rounds over or chips.

Shank type. The shank must match your drill. Straight shanks fit any standard keyed or keyless chuck. Hex shanks fit standard chucks too, and also work in quick-change drivers, with flat sides that give the chuck more grip. SDS shanks are a different system: they slide into SDS rotary hammers and will not fit a standard chuck. Every set here uses a straight or hex shank; SDS rotary hammer owners need SDS bits instead.

Hammer mode. Masonry bits are designed for hammer drilling, where the drill pulses forward while it spins, chipping away at the material far faster than a regular drill. In soft brick and block, a regular drill in rotary mode can still work, though more slowly; for poured concrete, hammer mode is close to a requirement.

Size range. Home masonry jobs mostly need holes from 1/8 inch to 1/2 inch: pilot holes, plastic wall plugs, and sleeve or wedge anchors. A 7-piece set covers that range with one bit per common size, while a 10-piece or 14-piece set adds intermediate sizes and spares of the sizes you use most.

Flute design and dust. The spiral flutes carry dust out of the hole. A fast spiral clears dust quickly, keeping the bit cooler; when dust packs in, the bit rubs instead of cutting, so pull it out every few seconds on deep holes. Masonry dust contains silica, so wear a dust mask, eye protection, and hearing protection, and mark your depth with tape on the bit.

Material. Soft clay brick and hollow block drill easily and suit any carbide masonry bit. Poured concrete is harder and demands hammer mode and a fresh carbide tip, while natural stone varies: soft limestone drills like brick, hard granite wears bits fast. None of these bits are made for tile, glass, or porcelain — those need diamond or spear-point bits, and a masonry bit will crack them.

1. DEWALT DW5207 7-Piece Percussion Masonry Drill Bit Set

The DEWALT DW5207 is the most dependable pick here, and the one to buy first for a single home masonry set. Seven carbide-tipped bits cover the sizes most home jobs need, from small pilot holes to 1/2-inch anchor holes. The 3-flat shank is the detail that sets it apart: three flat faces give the chuck more grip, so the bit is far less likely to slip when it meets hard concrete. Built for percussion drilling, it pairs with a hammer drill for the fastest holes in poured concrete, while still working in a regular drill on brick and block. Listing data shows more than 600 bought in the past month.

Specs

  • 7 pieces; carbide tips; 3-flat straight shank; sizes from 1/8 inch to 1/2 inch; percussion rated for hammer drills; for brick, block, and concrete; ASIN B00004RHBF

Keep in mind: Seven bits cover the common sizes, with no intermediate sizes or duplicates. Weekend masonry drillers may want the wider Bosch BM5000 set below as well. Let the carbide tip do the work and avoid leaning hard on the drill, which only wears the tip faster.

2. Bosch BM5000 14-Piece Fast Spiral Rotary Masonry Bit Set

The Bosch BM5000 is the best choice when you want more bits on hand. Fourteen carbide-tipped bits in assorted sizes let you pick the exact diameter for an odd anchor or a tight pilot hole instead of forcing the nearest size. The fast spiral flute clears dust quickly, keeping the bit cooler on longer holes. The straight shank fits any standard chuck, and the 120-degree point helps the bit bite instead of wandering across brick or block. Bosch lists this set as not discontinued, with a current Amazon offer as of early February 2026.

Specs

  • 14 pieces; carbide tips; straight shank; fast spiral double flute; 120-degree point; assorted sizes; for block, brick, and masonry; ASIN B00ELCLJMG

Keep in mind: With fourteen bits, the case takes up more room than a compact 7-piece set. It is a rotary masonry design, so its strength is steady rotary drilling in brick and block rather than aggressive hammer work in poured concrete.

3. SKIL MDB5000 10-Piece Hex Shank Carbide Hammer Drill Bit Set

The SKIL MDB5000 is a solid mid-size set for homeowners who want hex-shank bits. Ten bits with dual-cutting carbide tips cover common anchor and pilot sizes for brick, cinder block, and concrete. The hex shank is the selling point: six flat sides lock into a standard chuck or a quick-change driver with less chance of slipping than a round shank, and the bit swaps quickly when you move between drilling and driving screws. It is made for setting anchors and drilling pilot holes — mounting hardware on masonry walls rather than heavy construction work.

Specs

  • 10 pieces; dual-cutting carbide tips; hex shank; for brick, cinder block, and concrete; for anchor setting and pilot holes; ASIN B0BL335TGP

Keep in mind: Ten bits still leave a few gaps between sizes compared with the 14-piece Bosch set, so check that the sizes you use most are included. The hex shank is an advantage in a quick-change chuck but offers no extra benefit in a plain keyed chuck.

4. Milwaukee Shockwave 7-Piece Carbide Hammer Drill Bit Kit 48-20-9052

The Milwaukee Shockwave kit is the pick for homeowners who already use Milwaukee tools and want a compact carbide set built for hammer drilling. Seven carbide-tipped bits are made for hammer drills, with a Shockwave hex shank designed to handle the vibration and torque of hammer mode without slipping. The kit covers the common anchor sizes for concrete, block, and brick, and its compact case fits easily in a tool bag. Tracker data shows third-party offers current as of late December 2025, though no Amazon-sold offer appears in the tracked history — confirm availability before ordering.

Specs

  • 7 pieces; carbide tips; Shockwave hex shank; hammer-drill rated; for concrete, block, and brick; ASIN B08LP21W7X

Keep in mind: The tracked data shows no Amazon-sold offer in the history, only third-party offers, so availability may vary. It is tuned for hammer drilling; on soft brick in rotary mode, a standard straight-shank set drills just as well.

5. Bosch HCBG700 7-Piece Blue Granite Turbo Carbide Hammer Drill Bit Set

The Bosch HCBG700 Blue Granite set is a compact carbide set for brick, stone, concrete, and masonry, with sizes from 1/8 inch to 3/8 inch. The straight shank fits any standard chuck, and the carbide tips are made for hammer drilling in hard materials. The seven sizes suit smaller anchors and pilot holes — wall plugs, small sleeve anchors, and mounting brackets. One honest flag: the last Amazon crawl showed no featured offers, so confirm availability before ordering and have a backup pick in mind.

Specs

  • 7 pieces; carbide tips; straight shank; sizes from 1/8 inch to 3/8 inch; for stone, concrete, and masonry; ASIN B000VC3O8M

Keep in mind: The top size is 3/8 inch, so this set cannot drill 1/2-inch holes for larger wedge anchors — pick the DEWALT or SKIL set if you need that size. The no-featured-offers flag means availability should be confirmed before ordering.

Who Should Skip Masonry Drill Bit Sets

If you own an SDS rotary hammer, skip this guide: SDS bits have a slotted shank that locks into an SDS chuck, and the straight and hex shanks here will not fit. If you need to drill ceramic tile, porcelain, or glass, a masonry bit will crack the material — buy a diamond or spear-point bit made for tile instead. If your only job is drilling wood or metal, a twist bit set is the right tool. If you need a single odd size for one job, a single bit costs less than a full set. For holes deeper than about six inches, look for long masonry bits rather than a standard set.

FAQ

Can I use masonry drill bits in a regular drill without hammer mode?

Yes, on soft brick and hollow block a regular drill in rotary mode can cut a hole, though more slowly than a hammer drill. On poured concrete, a regular drill struggles and the bit overheats, so hammer mode is close to a requirement. Drill a pilot hole first and pull the bit out often to clear dust.

What is the difference between a masonry bit and a twist bit?

A masonry bit has a carbide tip that grinds through brick, block, and concrete, plus wide flutes that clear dust. A twist bit has a sharp steel point and cutting edges made for wood, plastic, and metal. A twist bit dulls fast on masonry, and a masonry bit cuts wood and metal slowly — each belongs on its own material.

Do I need SDS bits for concrete at home?

No, not for most home jobs. Straight-shank and hex-shank masonry bits in a hammer drill handle anchors, wall plugs, and brackets in brick, block, and concrete. SDS bits belong on SDS rotary hammers, heavier machines for frequent concrete drilling. If you already own an SDS rotary hammer, buy SDS bits; if you own a standard hammer drill, these sets fit.

How do I keep a masonry bit from overheating?

Drill in short bursts and pull the bit out every few seconds to clear dust, which keeps the tip cooler. Use hammer mode on concrete so the bit chips material away instead of rubbing against it. Never quench a hot bit in water, since sudden cooling can crack the carbide tip. Once the tip rounds over or chips, replace the bit.

Final Verdict

For most home masonry jobs, the DEWALT DW5207 is the set to buy first: seven carbide-tipped bits, a 3-flat shank that resists slipping, and sizes from 1/8 inch to 1/2 inch that match common anchors. The Bosch BM5000 14-piece set is the better buy when you want more sizes on hand, and the SKIL MDB5000 is the easiest choice for a quick-change chuck. The Milwaukee Shockwave kit suits hammer-drill owners who want a compact set, while the Bosch HCBG700 covers small anchors well. Whichever set you choose, drill in hammer mode on concrete and clear dust often.

Product and ASIN Reference

Product ASIN
DEWALT DW5207 7-Piece Percussion Masonry Drill Bit Set B00004RHBF
Bosch BM5000 14-Piece Fast Spiral Rotary Masonry Bit Set B00ELCLJMG
SKIL MDB5000 10-Piece Hex Shank Carbide Hammer Drill Bit Set B0BL335TGP
Milwaukee Shockwave 7-Piece Carbide Hammer Drill Bit Kit 48-20-9052 B08LP21W7X
Bosch HCBG700 7-Piece Blue Granite Turbo Carbide Hammer Drill Bit Set B000VC3O8M
C
Carpenter's Equip Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Masonry Drill Bits for Brick and Concrete…Check price on Amazon

Related guides

Browse all Equipment guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.