Key takeaways
- Compare table saw mobile bases for moving heavy cabinet and contractor saws, with weight ratings, wheel locks, and frames that fit your saw.
What's inside
- Quick Answer
- How to Choose the Right Table Saw Mobile Base
- 1. HTC HTC-2000 Adjustable Mobile Base, 500 lb
- 2. Shop Fox D2057A Adjustable Mobile Base, 700 lb
- 3. JET JMB-UMB Universal Mobile Base, 600 lb
- 4. Bora Portamate PM-1000 Universal Mobile Base, 400 lb
- 5. Bora Portamate PM-1100 Customizable Mobile Base Kit, 400 lb
- Who Should Skip a Table Saw Mobile Base
- Final Verdict
- Frequently Asked Questions
- Product and ASIN Reference
- Quick Answer
- How to Choose the Right Table Saw Mobile Base
- 1. HTC HTC-2000 Adjustable Mobile Base, 500 lb
- 2. Shop Fox D2057A Adjustable Mobile Base, 700 lb
- 3. JET JMB-UMB Universal Mobile Base, 600 lb
- 4. Bora Portamate PM-1000 Universal Mobile Base, 400 lb
- 5. Bora Portamate PM-1100 Customizable Mobile Base Kit, 400 lb
- Who Should Skip a Table Saw Mobile Base
- Final Verdict
- Frequently Asked Questions
- Product and ASIN Reference
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Equipment › Best Table Saw Mobile Bases for Moving Heavy Saws Easily
A table saw is one of the heaviest tools in a small shop, and one that benefits most from being able to move: roll it against the wall, pull it out for a long rip, then roll it back. This guide compares five table saw mobile bases, from heavy steel frames for a full cabinet saw to a build-it-yourself kit for almost any footprint.
As an Amazon Associate, we earn from qualifying purchases.
Sections
- Quick Answer
- How to Choose the Right Table Saw Mobile Base
- 1. HTC HTC-2000 Adjustable Mobile Base, 500 lb
- 2. Shop Fox D2057A Adjustable Mobile Base, 700 lb
- 3. JET JMB-UMB Universal Mobile Base, 600 lb
- 4. Bora Portamate PM-1000 Universal Mobile Base, 400 lb
- 5. Bora Portamate PM-1100 Customizable Mobile Base Kit, 400 lb
- Who Should Skip a Table Saw Mobile Base
- Final Verdict
- Frequently Asked Questions
- Product and ASIN Reference
Quick Answer
For the heaviest saws, the Shop Fox D2057A leads with a 700-pound capacity and a rigid steel tube frame. For quick tool-free setup, the JET JMB-UMB snaps together with spring pins and carries 600 pounds. For benchtop and contractor saws, the Bora PM-1000 and PM-1100 both carry 400 pounds, while the HTC HTC-2000 sits in the middle at 500 pounds with foot-operated locking levers.
How to Choose the Right Table Saw Mobile Base
Match the capacity to your saw, with margin to spare. A benchtop saw may weigh under 100 pounds, a contractor saw often lands between 200 and 350 pounds, and a cabinet saw with wings can pass 500 pounds. Pick a base with a capacity well above the saw weight, since the limit covers the whole machine.
Measure your saw footprint before you buy. Every base has a minimum and a maximum size. Measure your saw cabinet at the floor, including legs or feet, then check that the base adjusts to cover those dimensions. A base that is too small leaves the saw overhanging the frame; one too large wastes floor space.
Look at how the base locks in place. A mobile base needs two modes: rolling freely when you move the saw, and sitting rock solid when you cut. Most bases here use foot-operated levers that drop fixed feet to the floor, or screw-down leveling feet turned by hand. Foot levers are faster on smooth concrete; screw-down feet take longer but level the saw on an uneven garage floor. Hard rubber wheels roll smoothly and resist flat spots, and low-profile bases raise the saw less than an inch.
Know the difference between a frame base and a kit. A frame base arrives as rails and corner pieces that bolt into a rectangle. A kit, like the Bora PM-1100, supplies only the caster corners and hardware; you supply a plywood platform cut to your saw footprint. Kits fit odd shapes no fixed frame covers, but need extra cutting first.
1. HTC HTC-2000 Adjustable Mobile Base, 500 lb
The HTC HTC-2000 is a classic universal frame. It adjusts from 12 by 12 inches to 34 by 34 inches, with rails drilled every inch so you can dial in the exact fit. The powder-coated steel frame carries up to 500 pounds, covering most contractor saws and many lighter cabinet saws.
Two large foot-operated levers made from glass-filled nylon handle locking. Step on a lever and the base drops onto fixed feet that hold the machine just three quarters of an inch off the floor, so the saw sits almost at its normal height.
Assembly takes patience, since the base ships as many parts, but the finished frame is rigid and the powder coat holds up well. One flag: the Amazon listing showed no featured offers at the last crawl, and tracker records end in early 2025, so confirm the live listing before ordering.
Specs
- Weight capacity: 500 lb
- Size range: 12 x 12 in to 34 x 34 in square
- Locking: Two foot-operated levers, fixed feet
- Wheels: 4 wheels
- Frame: Powder-coated steel, rails drilled every 1 in
- Lift height: 3/4 in off the floor when locked
2. Shop Fox D2057A Adjustable Mobile Base, 700 lb
The Shop Fox D2057A is the strongest base in this guide, and the pick for a heavy cabinet saw. Its rectangular steel tube frame adjusts from 20 by 20 inches to 29-1/2 by 29-1/2 inches, with reinforced corner brackets that resist twisting under load. The widely published capacity is 700 pounds, which covers a cabinet saw with wings and room to spare.
Screw-down leveling feet with hand knobs lock the base, paired with two swivel and two fixed casters. The screw feet take longer to set than a foot lever, but they level the saw on an uneven floor. The 3-inch metal casters have a poly tread that rolls quietly on concrete and resists flat spots.
One detail: the newest instruction sheet lists a 1,000-pound capacity, while most listings and earlier manuals list 700 pounds. Treat 700 pounds as the safe working figure. An extension kit, model D2259A, supports saws with an extension table. Tracker records show the listing active with an Amazon offer in February 2026.
Specs
- Weight capacity: 700 lb (newest manual lists 1,000 lb; use 700 lb as the safe figure)
- Size range: 20 x 20 in to 29-1/2 x 29-1/2 in
- Locking: Screw-down leveling feet with hand knobs
- Wheels: 3-in metal casters with poly tread, 2 swivel, 2 fixed
- Frame: Rectangular steel tubing, reinforced corners
- Extras: Extension kit D2259A
3. JET JMB-UMB Universal Mobile Base, 600 lb
The JET JMB-UMB is the easiest base in this guide to assemble. Its spring-pin snap adjustment needs no tools: pull the pins, slide the rails, and snap the pins back in. The base adjusts from 18 by 18 inches to 28 by 28 inches and carries up to 600 pounds, which covers contractor saws and most cabinet saws.
The base weighs only about 21-1/2 pounds, so it is easy to handle, yet the alloy steel frame is strong enough for a heavy saw. Two fixed and two swivel casters give easy maneuvering, and foot-operated levers raise and lower the machine. The low-clearance design lifts the saw just half an inch off the floor when locked, the smallest lift in this guide.
Two flags: the listing is marked as not compatible with JET machine tables, and the Amazon crawl showed no featured offers even though the listing carries a high bought badge. Confirm the live listing before ordering. JET backs the base with a one-year warranty.
Specs
- Weight capacity: 600 lb
- Size range: 18 x 18 in to 28 x 28 in
- Locking: Foot-operated levers, low-clearance design
- Wheels: 4 casters, 2 fixed, 2 swivel
- Frame: Alloy steel, spring-pin snap adjustment, no tools needed
- Weight: 21.5 lb; lift height 1/2 in; warranty 1 year
4. Bora Portamate PM-1000 Universal Mobile Base, 400 lb
The Bora Portamate PM-1000 is a straightforward universal frame for benchtop and contractor saws. It adjusts from 12 by 12 inches to 32 by 32 inches square, and opens into a rectangle up to 17 by 48 inches, which suits saws with a long, narrow footprint. The 400-pound capacity covers most contractor and benchtop saws with margin.
The base uses 3-inch hard rubber wheels that glide smoothly on concrete, and foot-operated locking levers that lock the steel frame firmly in place. Like the HTC, it raises the machine by less than an inch. The rails and corner pieces have holes spaced every inch, so you can fine-tune the fit.
The PM-1000 is a fixed frame, not a kit, so everything you need is in the box. It is the simplest base in this guide to set up. For a full cabinet saw with cast-iron wings, step up to one of the heavier bases above.
Specs
- Weight capacity: 400 lb
- Size range: 12 x 12 in to 32 x 32 in square, or 17 x 48 in rectangle
- Locking: Foot-operated locking levers
- Wheels: 3-in hard rubber wheels
- Frame: Powder-coated steel, rails drilled every 1 in
- Lift height: Less than 1 in
5. Bora Portamate PM-1100 Customizable Mobile Base Kit, 400 lb
The Bora Portamate PM-1100 is a kit, not a complete frame. The box holds four caster corner pieces with pre-drilled holes, wheels, foot levers, and hardware. You supply a sheet of 3/4-inch plywood, cut to your saw footprint, and bolt the corners on. The result is a custom base that fits almost any machine, from 12 by 12 inches up to a generous 60 by 48 inches.
That flexibility is the whole point. Odd footprints, splayed legs, and extension tables that no fixed frame covers can all ride on a PM-1100, as long as the plywood platform is solid and the total weight stays under 400 pounds. The kit uses 3-inch plastic wheels, two fixed and two swivel, with foot levers that lock the base in place.
The trade-off is extra work: you need to buy plywood, cut it square, and drill the corner holes yourself. The 400-pound capacity also rules out heavy cabinet saws, so this kit suits contractor and benchtop saws best. One flag: the Amazon crawl showed no featured offers, so confirm the live listing before ordering. The kit is not discontinued.
Specs
- Weight capacity: 400 lb
- Size range: 12 x 12 in minimum to 60 x 48 in maximum (plywood platform supplied by user)
- Locking: Foot-operated levers
- Wheels: 3-in plastic wheels, 2 fixed, 2 swivel casters
- Kit contents: 4 corner pieces, wheels, hardware; plywood NOT included
- Weight: 11 lb; lift height less than 1 in; warranty 1 year
Who Should Skip a Table Saw Mobile Base
Skip a mobile base if your saw already sits on a dedicated stand that never moves. A cabinet saw bolted to a shop floor in a fixed layout gains nothing from wheels, and a mobile base adds a small amount of height and flex that a fixed stand avoids.
Skip the 400-pound bases if your saw is a full cabinet saw with cast-iron extension wings. The Bora PM-1000 and PM-1100 suit contractor and benchtop saws, but a heavy cabinet saw with wings and a heavy fence can push past 400 pounds, and an overloaded base flexes, rolls poorly, and can fail at the casters. Use the Shop Fox D2057A or the JET JMB-UMB for that weight class.
Skip the PM-1100 kit if you do not want to cut plywood. The kit is only a good deal if you are comfortable measuring, cutting, and drilling a platform. If you want a base that bolts together from the box, pick one of the four frame bases instead.
Final Verdict
For a heavy cabinet saw, the Shop Fox D2057A is the pick, with the highest capacity in this guide and a rigid steel tube frame that stays square under load. For a contractor saw that moves often, the JET JMB-UMB assembles fastest and carries 600 pounds. For benchtop and lighter contractor saws, the Bora PM-1000 is the simplest fixed frame, while the Bora PM-1100 kit fits footprints no fixed frame covers. The HTC HTC-2000 sits in the middle at 500 pounds. Measure your saw footprint first, confirm the live listing, and pick a capacity with margin above your saw weight.
Frequently Asked Questions
How do I measure my table saw for a mobile base?
Measure the length and width of the saw cabinet at the floor, including legs and feet. Compare those dimensions to the base adjustment range, and leave a little margin so the saw sits fully on the frame. If the saw has an extension table, measure the full footprint with the table attached.
Can a mobile base hold a cabinet saw?
Yes, if the capacity covers the saw weight with margin. A cabinet saw with cast-iron wings can weigh 500 pounds or more, so use a base built for 600 to 700 pounds, like the JET JMB-UMB or the Shop Fox D2057A. The 400-pound bases suit contractor and benchtop saws, not heavy cabinet saws with wings.
Do mobile bases make a table saw less stable?
A good mobile base locks the saw onto fixed feet, so it does not move during a cut. The key is the locking mechanism: foot levers or screw-down feet that drop the frame to the floor and take the weight off the wheels. Always lock the base before you switch the saw on.
Should I pick a frame base or a kit like the Bora PM-1100?
Pick a frame base if your saw footprint is a standard square or rectangle. Pick the PM-1100 kit if your footprint is odd or oversized and you are comfortable cutting a plywood platform to match. Kits fit almost anything, but they need extra work before the saw can roll.
Product and ASIN Reference
| Product | ASIN |
|---|---|
| HTC HTC-2000 Adjustable Mobile Base, 500 lb | B00002262M |
| Shop Fox D2057A Adjustable Mobile Base, 700 lb | B0000DD6B9 |
| JET JMB-UMB Universal Mobile Base, 600 lb | B00006S7CE |
| Bora Portamate PM-1000 Universal Mobile Base, 400 lb | B00016BI5O |
| Bora Portamate PM-1100 Customizable Mobile Base Kit, 400 lb | B06W5JJ2QN |
Related guides
Related guides
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.





Write Your Review
No reviews yet. Be the first to share your experience!