Updated Nov 21, 2026· 10 min read

Key takeaways

  • Find the best T-track for workbenches and woodworking jigs at home. Compare 48-inch and 24-inch aluminum tracks, profiles, and bolt sizes before you buy.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

A workbench without a clamping system leaves you holding parts by hand while you rout, sand, or saw. A length of T-track set into the bench top changes that. Slide in a bolt, add a hold-down clamp or a stop block, and the workpiece stays put while both hands stay on the tool. This guide covers five loose T-track extrusions for home workbenches and woodworking jigs: 48-inch and 24-inch lengths, double-cut universal profiles, and miter profiles that drop into a table saw slot. Three of the five picks come from POWERTEC, which dominates this corner of the market, and the guide says so openly. Every pick is a track on its own, not a fence, gauge, or sled kit with track bundled in.

Our top pick: POWERTEC 71373 48-Inch Double-Cut Universal T-Track, 4-Count. Runner-up: POWERTEC 71156 48-Inch Miter T-Track with T-Bar.

As an Amazon Associate, we earn from qualifying purchases.

Sections
  1. Quick Answer
  2. How to Choose T-Track for Your Workbench
  3. 1. POWERTEC 71373 Double-Cut Universal T-Track, 48-Inch, 4-Count
  4. 2. POWERTEC 71156 Miter T-Track with T-Bar, 48-Inch
  5. 3. POWERTEC 71167-P2V Miter T-Track, 48-Inch
  6. 4. SeekLiny Double-Cut Universal T-Track, 48-Inch, 4-Pack
  7. 5. RED HOUSE TOOLS 24-Inch T-Track Kit, 4-Pack
  8. Who Should Skip T-Track
  9. Frequently Asked Questions
  10. Final Verdict
  11. Product and ASIN Reference

Quick Answer

If you want one track for a home workbench, buy the POWERTEC 71373 48-inch double-cut 4-count: four long lengths, predrilled holes, and a universal profile that takes common jig hardware. For a table saw sled, the POWERTEC 71156 with its included T-bar fits a miter slot. Short on bench space or building a small jig, the 24-inch RED HOUSE TOOLS 4-pack is the compact pick, with a listing check first.

How to Choose T-Track for Your Workbench

Two profiles cover nearly every home shop job. A double-cut universal track has two channels, so it accepts both 1/4-inch hex bolts and 5/16-inch T-bolts, which makes it the flexible choice for hold-down clamps, stop blocks, and featherboards on a bench top or a fence face. A miter track is a single wide channel sized for a 3/4-inch wide by 3/8-inch deep miter slot, and it pairs with a miter bar or T-bar that keeps a sled or gauge running true. Pick universal for clamping points anywhere on the bench, and miter when the track must guide a moving jig.

Length follows the bench. A 48-inch length suits a full bench run, a long router table fence, or a crosscut sled, and four-packs lay parallel runs across a wide top. A 24-inch length suits a small bench, a drill press table, or a short fence where a full length would overhang. Measure the bench before ordering. Aluminum track cuts easily with a hacksaw or a miter saw fitted with a metal-cutting blade, so a long length can always become two short ones; file the cut ends smooth so bolts slide past the joint.

Material and mounting matter as much as size. Anodized aluminum resists corrosion in a damp garage and lets bolt heads glide instead of galling, which is why every pick in this guide is aluminum rather than steel. Predrilled mounting holes save layout time, and the track should sit in a routed dado so its top face ends up flush with the bench surface; a proud track catches workpieces, while a sunk track hides the slot. Screw the track down along its length so it cannot flex under clamp load.

Finally, match the track to the hardware you already own. Hold-down clamps, stop blocks, and featherboards each need a bolt head that fits the slot, so check the slot opening against your clamp kit before you buy. A universal double-cut track is forgiving because it takes two bolt sizes, while a miter track locks you into miter-slot hardware.

1. POWERTEC 71373 Double-Cut Universal T-Track, 48-Inch, 4-Count

The 71373 is the best overall pick because it solves the most common job in the simplest way: four 48-inch lengths of double-cut universal track, enough to run parallel lines across a full-size bench top or to outfit several jigs from one box. The double-cut profile carries two channels, so both 1/4-inch hex bolts and 5/16-inch T-bolts seat in the same extrusion, and one track accepts hold-down clamps, stop blocks, and featherboards without an adapter. Predrilled mounting holes run the length of each piece, so the track screws down fast into a routed dado and stays put under clamp load. Anodized aluminum keeps the slot sliding smoothly in a garage that sees humidity swings. The four-count pack also covers a drill press table plus a router table fence plus a bench run from a single order. This is the pick to buy first when you are setting up a new bench and want clamping points everywhere.

Specs:
– Length: 48 inches per piece, 4-count pack
– Profile: Double-cut universal, two channels
– Material: Anodized aluminum
– Mounting: Predrilled holes along each length
– Bolt fit: 1/4-inch hex bolts and 5/16-inch T-bolts
– Model: 71373

2. POWERTEC 71156 Miter T-Track with T-Bar, 48-Inch

The 71156 is the pick for table saw sleds and miter gauges because it is built around the miter slot rather than the bench top. The track measures 48 inches long by 2.5 inches wide by 0.5 inch tall, and the included T-bar rides in a 3/4-inch wide by 3/8-inch deep miter slot, keeping a crosscut sled or a miter gauge aligned through the whole cut. That width gives the track a broad footprint, so it mounts solidly to a sled base or a router table top without rocking. Where the 71373 gives you clamping points, the 71156 gives you guidance: the bar and the slot work together so the jig cannot wander. Buy it when alignment matters more than adding clamp points.

Specs:
– Length: 48 inches, single track with T-bar
– Profile: Miter track, 2.5 inches wide, 0.5 inch tall
– Miter slot fit: 3/4 inch wide by 3/8 inch deep
– Material: Anodized aluminum
– Included: T-bar for the miter slot
– Model: 71156

3. POWERTEC 71167-P2V Miter T-Track, 48-Inch

The 71167-P2V is the slim miter track for shops where the 71156 is wider than the job needs. At 48 inches long by 1 inch wide by 1 inch tall, it drops into a router table, a table saw sled, or a miter gauge setup without eating the bench space that a 2.5-inch-wide track would take. The taller 1-inch profile gives the slot depth for a featherboard or a stop block to bite, and it pairs well with a miter gauge or a featherboard on a router table fence. Think of it as the miter-track counterpart to the 71373: same 48-inch reach, but built to guide rather than to clamp. It suits a router table fence or a narrow sled where a full-width miter track would crowd the work surface, and it also works as a second track beside a universal run, giving one guided line next to the clamping lines.

Specs:
– Length: 48 inches, single track
– Profile: Miter track, 1 inch wide, 1 inch tall
– Material: Anodized aluminum
– Use: Router table, table saw sled, miter gauge, featherboard
– Bolt fit: Miter-slot hardware and T-bolts
– Model: 71167-P2V

4. SeekLiny Double-Cut Universal T-Track, 48-Inch, 4-Pack

SeekLiny is the non-POWERTEC alternative in the universal group, and it earns its place on the same terms: four 48-inch lengths of double-cut track in a silver anodized finish, with predrilled holes and 48 screws in the box. The profile matches the 71373, so the same 1/4-inch hex bolts and 5/16-inch T-bolts seat in its channels, and the same hold-downs and stop blocks work with it. The included screws are a small but real advantage, since they save a separate hardware run when you are routing dadoes and mounting four lengths in one session. Four lengths cover a wide bench top in parallel runs, or split across a bench, a drill press table, and a router fence. Buy SeekLiny when you want the four-pack format and the universal profile without the POWERTEC name, and check your clamp hardware against the slot before mounting.

Specs:
– Length: 48 inches per piece, 4-pack
– Profile: Double-cut universal, two channels
– Material: Anodized aluminum, silver finish
– Mounting: Predrilled holes, 48 screws included
– Bolt fit: 1/4-inch hex bolts and 5/16-inch T-bolts
– Brand: SeekLiny

5. RED HOUSE TOOLS 24-Inch T-Track Kit, 4-Pack

The RED HOUSE TOOLS kit is the compact pick: four 24-inch lengths of black anodized aluminum track, model TTRAX-BLK-4, each 24 inches long by 1 inch wide by 1 inch tall, with screws in the box. The shorter length fits a small bench, a drill press table, or a short jig fence where a 48-inch piece would need cutting, and the black anodized finish suits a bench where the track stays visible. It is the only 24-inch pick in this guide, and the four-pack still covers a small top in parallel runs. One flag needs stating plainly: the Amazon crawl naming this product, its model, and its code is 327 days old, the oldest in the group, and that same crawl showed no featured offers, with no fresher stock signal since. The identity of the listing is confirmed, but check that the listing is live before ordering. If it is gone, the POWERTEC 71379-P4 Heavy Duty 48-inch track or the Hot Favorable 48-inch 4-pack are the fallback options by name.

Specs:
– Length: 24 inches per piece, 4-pack
– Profile: Universal T-track, black anodized
– Material: Anodized aluminum
– Size: 24 x 1 x 1 inches, 1.5 pounds
– Mounting: Screws included
– Model: TTRAX-BLK-4

Who Should Skip T-Track

T-track earns its place on a bench that stays in one shop and sees regular jig work, and it is easy to overbuy. Skip it when your bench is a lightweight folding table you carry to job sites, since routing a dado into a thin top weakens it and the track adds weight you will feel on every move. Skip it when you clamp one thing in one spot: a single bench dog hole or a clamp-on fence does that job with less work. Skip it when your table saw sled already runs in a factory miter slot with its own bar, because extra track adds nothing to a sled that already tracks true. Renters who cannot rout into a bench top should also pass, since track needs a dado to sit flush. A bench hook or a pair of hold-down clamps on a plain top may serve a light shop better than a full track layout.

Frequently Asked Questions

What size T-track fits a standard home workbench?

A 48-inch length fits most home benches, which commonly run four to six feet long, and a four-pack lays two or three parallel runs with length left over for a fence or a jig. A 24-inch length fits a small bench, a drill press table, or a short router fence. Measure the bench first, then buy the length that covers the working area with a little to spare, since track cuts shorter easily but never grows longer.

Can I cut 48-inch T-track to a shorter length?

Yes. Clamp the extrusion firmly, cut it with a hacksaw or a miter saw fitted with a metal-cutting blade, and file the cut ends smooth so bolt heads slide past the joint without catching. Deburr the slot opening as well as the ends, and test a bolt through the cut before mounting the piece. Cut pieces work exactly like factory lengths once the ends are clean.

What bolts fit a double-cut universal T-track?

A double-cut profile has two channels, so it takes 1/4-inch hex bolts in one channel and 5/16-inch T-bolts in the other. Match the bolt head to the slot, then match the clamp, stop block, or featherboard to the bolt. If your clamp kit uses only one bolt size, either channel still works, and the second channel stays free for different hardware later.

Does T-track work on a router table as well as a workbench?

Yes. A miter-profile track drops into the router table slot and guides a featherboard or a miter gauge, while a universal track mounted on the fence face gives clamping points for stops and hold-downs. The same aluminum extrusion serves both jobs, so one purchase can outfit a bench and a router table when you buy a four-pack.

Final Verdict

For most home shops, the POWERTEC 71373 48-inch double-cut 4-count is the buy-first pick: four long lengths, predrilled holes, and a universal profile that takes the two common jig bolt sizes. Add the POWERTEC 71156 when a table saw sled or miter gauge needs guidance, or the slimmer 71167-P2V when bench space is tight. SeekLiny matches the 71373 format without the POWERTEC name and includes its screws. The RED HOUSE TOOLS 24-inch 4-pack rounds out the group for small benches and short jigs, with a listing check first because its stock signal is the oldest in the guide. Measure the bench, match the profile to the job, and mount the track flush.

Product and ASIN Reference

Product ASIN
POWERTEC 71373 48-Inch Double-Cut Universal T-Track, 4-Count B07FF6S889
POWERTEC 71156 48-Inch Miter T-Track with T-Bar B07JZ79SSN
POWERTEC 71167-P2V 48-Inch Miter T-Track B0B596BGWS
SeekLiny 48-Inch Double-Cut Universal T-Track, 4-Pack B0CK2N65CL
RED HOUSE TOOLS 24-Inch T-Track Kit, 4-Pack B0DJDZHJ1Z
C
Carpenter's Equip Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best T-Track for Workbenches and Woodworking Jigs at…Check price on Amazon

Related guides

Browse all Equipment guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.