Updated Nov 21, 2026· 10 min read

Key takeaways

  • Compare concrete floats for smooth slabs and flat finishes, from magnesium to wood and resin, with sizes and handles for every pour on site.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

A concrete float turns a rough screeded slab into a flat, even surface ready for its final finish. After the screed board levels the pour, the float presses down stray aggregate, closes small voids, and draws a thin layer of cement paste to the top.

Our top pick: MARSHALLTOWN 143D Round End Magnesium Hand Float, 16 Inch. Runner-up: MARSHALLTOWN 142D Magnesium Hand Float, 12 Inch, Beveled End.

One honest note up front: every float in this guide comes from MARSHALLTOWN. The brand simply dominates this niche on Amazon: after searching Goldblatt, Kraft Tool, Bon Tool, VEVOR, and QLT, no other brand produced listings with the ASIN printed in page text. The choice is still real, because the five picks differ in blade length, end shape, handle style, and reach.

As an Amazon Associate, we earn from qualifying purchases.

Sections
  1. Quick Answer
  2. How to Choose a Concrete Float
  3. 1. MARSHALLTOWN 143D Round End Magnesium Hand Float, 16 Inch
  4. 2. MARSHALLTOWN 142D Magnesium Hand Float, 12 Inch, Beveled End
  5. 3. MARSHALLTOWN 4501D Square End Hand Float, 12 x 3-1/2 Inch
  6. 4. MARSHALLTOWN 143RD Round End Magnesium Hand Float, 16 Inch, Large Round DuraSoft Handle
  7. 5. MARSHALLTOWN 154LRW Round End Magnesium Float, 20 x 3-1/8 Inch
  8. Who Should Skip These Floats
  9. Final Verdict
  10. Frequently Asked Questions
  11. Product and ASIN Reference

Quick Answer

For most slabs, the MARSHALLTOWN 143D 16-inch round-end magnesium float is the best first pick, with enough blade to cover open floor and rounded ends that will not dig in during sweeping passes. Choose the 12-inch 142D for patches and tight work, the square-end 4501D for corners and form edges, the large-handle 143RD for long sessions, and the 20-inch 154LRW for wide open slabs.

How to Choose a Concrete Float

A float does one job at one moment: after screeding and before troweling. The concrete should have lost some of its surface sheen but still be soft enough to take a pass. Work too early and the blade sinks and drags; work too late and the surface has set past the point where floating helps. A hand float is for edges, patches, and spots a bull float cannot reach.

Blade material sets the finish. Magnesium is the professional default: light for its size, smooth on wet concrete, and able to open the pores so bleed water can escape without sealing the surface too soon. Wood leaves a rougher texture that suits a broom finish, but it soaks up water, warps, and wears faster. Resin works like wood for decorative work, yet lasts far longer. Every pick in this guide has a magnesium blade, so the real decisions here are size, end shape, and handle.

Blade length decides coverage against control. A 12-inch blade turns easily in tight spots and around obstacles, and it is the easiest length to control one-handed on a patch or a step. A 16-inch blade is the common middle ground for driveways, patios, and garage floors. A 20-inch blade covers the most per pass, but needs a steady two-handed stroke.

End shape matters more than it looks. Round ends glide through sweeping arcs without digging in, suiting most flatwork. Square ends reach flush into corners, along forms, and against walls where a rounded blade leaves an unfinished strip. Most finishers carry both shapes.

Handle style decides comfort over a long pour. A standard DuraSoft handle cushions the grip and cuts vibration. A large round DuraSoft handle gives more to hold for big hands and gloved work. A wood handle is the traditional choice, light and simple, with no cushioning. Finally, confirm the live listing before ordering: each pick was verified by searching its ASIN code and matching it to the product name and model in tracker text.

1. MARSHALLTOWN 143D Round End Magnesium Hand Float, 16 Inch

The 143D is the all-rounder of this guide and the float to buy first if the job list is mixed. Its 16-inch blade covers a patio or a garage floor at a good pace, and the round ends let the blade sweep in arcs without leaving dig marks at the turn. The extruded magnesium blade is light for its length, so the tool stays balanced through repeated passes, and the standard DuraSoft handle cushions the grip without adding bulk. The blade measures 3-1/8 inches wide, which keeps it nimble around obstacles while still giving enough bearing surface for flat work.

This float suits the main field of a slab: the open middle where the screed has done its work and the surface needs one or two smoothing passes before troweling. It also handles the transition zones where a bull float has left light ridges, pressing them flat without sealing the pores too early. It will not reach flush into a sharp corner, and it is not the tool for a very small patch. Confirm the live listing and match model 143D.

Specs

  • Blade: 16 inches long x 3-1/8 inches wide, extruded magnesium, round ends
  • Handle: standard DuraSoft
  • Model: 143D
  • ASIN: B000EOJPNA
  • Origin: assembled in the USA

2. MARSHALLTOWN 142D Magnesium Hand Float, 12 Inch, Beveled End

The 142D is the compact pick, and it earns its place on patches, steps, and tight work where a 16-inch blade is too long to turn. At 12 inches, the blade moves easily around pipes, drains, and column bases, and it is the easiest length in this guide to control one-handed when the other hand steadies a form or holds a hose. The beveled end helps the blade enter cleanly on each stroke.

The blade is extruded magnesium with a DuraSoft handle, the same pairing as the larger 143D, so the feel is familiar if the two are used together. Use the 16-inch float for the open field, then switch to the 142D for edges and small areas. The shorter blade also forgives an uneven stroke more readily. The trade-off is coverage: on a wide slab, it takes more passes. Confirm the live listing and match model 142D.

Specs

  • Blade: 12 inches long x 3-1/8 inches wide, extruded magnesium, beveled end
  • Handle: DuraSoft
  • Model: 142D
  • ASIN: B000KUBGUS
  • Origin: assembled in the USA

3. MARSHALLTOWN 4501D Square End Hand Float, 12 x 3-1/2 Inch

The 4501D is the edge tool of the set, and it is the only square-end pick here. Square ends reach flush into corners, along forms, and against walls, which is exactly where round-end blades leave a strip of unfinished concrete. At 12 inches long and 3-1/2 inches wide, this float gives a broader bearing surface than the 12-inch 142D, so each pass along an edge covers a little more ground while still turning easily in tight space.

The extra width also keeps the tool stable on the first pass along a form line. The DuraSoft handle matches the other picks. One flag: the listing title does not name the blade material, so confirm it on the live listing before ordering, match model 4501D, and do not substitute a look-alike with a different model number.

Specs

  • Blade: 12 inches long x 3-1/2 inches wide, square ends
  • Handle: DuraSoft
  • Model: 4501D
  • ASIN: B001RJ0LT8
  • Origin: assembled in the USA

4. MARSHALLTOWN 143RD Round End Magnesium Hand Float, 16 Inch, Large Round DuraSoft Handle

The 143RD takes the same 16-inch round-end magnesium blade as the 143D and fits it with a large round DuraSoft handle. The difference is grip: the larger handle fills the hand more fully, which suits big hands, thick work gloves, and long sessions where a slim handle begins to bite into the palm. The round profile also lets the hand rotate the tool slightly during a pass without losing its grip, which helps when the stroke changes direction around an obstacle.

In use, this float behaves like the 143D on the slab, with the same coverage and the same round-end glide through sweeping arcs. The choice between the two 16-inch round-end picks comes down to hand size and session length. A finisher working a full pour in gloves will feel the difference by the second hour, while a homeowner doing a single small patio may not need it. The trade-off is bulk: the large handle takes up more room in a tool bag and can feel clumsy for a smaller hand on short detail work. Check the model number carefully: it is easily confused with the standard-handle 143D. Confirm the live listing and match model 143RD.

Specs

  • Blade: 16 inches long x 3-1/8 inches wide, magnesium, round ends
  • Handle: large round DuraSoft
  • Model: 143RD
  • ASIN: B001RITHOY
  • Origin: made in the USA

5. MARSHALLTOWN 154LRW Round End Magnesium Float, 20 x 3-1/8 Inch

The 154LRW is the longest blade in this guide, and it is the pick for wide open slabs where coverage matters most. At 20 inches, each pass smooths a broad band of concrete, which cuts the number of strokes needed across a driveway or a large patio. The round ends keep the long blade from digging in at the turn, which is the main risk with a blade this long, and the wood handle keeps the tool light and simple.

The wood handle is light and traditional, but it does not cushion vibration and can feel slick when wet. This is the reach pick, not the comfort pick. It needs a steady two-handed stroke to stay level. On a small slab or a patch, it is too long to turn. This listing carries the fewest tracked buyer responses here, so confirm it with extra care and match model 154LRW.

Specs

  • Blade: 20 inches long x 3-1/8 inches wide, magnesium, round ends
  • Handle: wood
  • Model: 154LRW
  • ASIN: B001RJ2JIY
  • Origin: assembled in the USA

Who Should Skip These Floats

Skip this guide if the job is a bull float job. A hand float cannot cover a wide open slab efficiently, and buying one for a large driveway pour will leave the surface half finished while the concrete sets. A bull float or a fresno is the right tool for that scale. Skip them too for a steel trowel finish: only a steel trowel closes the pores and burnishes the slab. Skip the magnesium picks for a broom finish on a steep slope, where a wood float grips better. Skip the 20-inch 154LRW for patches and edges: the long blade will fight every turn. And skip the whole set if the concrete has already set past the floating window: the fix then is grinding or an overlay.

Final Verdict

For most slabs, buy the MARSHALLTOWN 143D first. Its 16-inch round-end magnesium blade covers the open field at a good pace, and it is the most forgiving size for a mixed job list. Add the 12-inch 142D for patches and tight work, and the square-end 4501D for corners and form edges, and the three together cover nearly every hand-floating job a homeowner or a small crew will face. Choose the large-handle 143RD instead of the 143D if the hands are big or the sessions run long, and reach for the 20-inch 154LRW when the slab is wide and open. Confirm each live listing by model number before ordering, because these listings move between sellers and the model number is the surest match.

Frequently Asked Questions

When should a concrete float be used in the finishing sequence?

Use a float after screeding and before troweling, when the concrete has lost some sheen but is still soft enough to take a pass. Working too early drags the blade, and working too late finds the surface set past floating.

What is the difference between a round-end and a square-end float?

Round ends glide through sweeping arcs without digging in, which suits open slabs and covers about four out of five flatwork jobs. Square ends reach flush into corners, along forms, and against walls where a rounded blade leaves a strip unfinished.

Can a concrete float replace a trowel?

No. A float levels and smooths but leaves the pores open so bleed water can escape. A steel trowel comes later to close the pores and burnish the slab. Using a float where a trowel is needed leaves a soft, dusty surface.

Is a wood float better than a magnesium float?

Neither is better in every case. Magnesium is lighter, smoother on wet concrete, and the professional default. Wood leaves a rougher texture that suits a broom finish, but it soaks up water, warps, and wears faster. Resin works like wood and lasts far longer.

Product and ASIN Reference

Product Model ASIN
MARSHALLTOWN 143D Round End Magnesium Hand Float, 16 Inch 143D B000EOJPNA
MARSHALLTOWN 142D Magnesium Hand Float, 12 Inch, Beveled End 142D B000KUBGUS
MARSHALLTOWN 4501D Square End Hand Float, 12 x 3-1/2 Inch 4501D B001RJ0LT8
MARSHALLTOWN 143RD Round End Magnesium Hand Float, 16 Inch, Large Round DuraSoft Handle 143RD B001RITHOY
MARSHALLTOWN 154LRW Round End Magnesium Float, 20 x 3-1/8 Inch 154LRW B001RJ2JIY
C
Carpenter's Equip Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Concrete Floats for Smooth Slabs and Flat…Check price on Amazon

Related guides

Browse all Equipment guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.