Best Tool Belts for Carrying Chisels Without Damaging Their Edges
A tool belt can keep a chisel close at hand, but a loose blade can catch on a hammer loop, […]
Equipment
Waist Tool Pouch vs Full Tool Belt for Finish Carpentry
A waist tool pouch and a full tool belt solve different problems. For finish carpentry, the right choice depends less
How to Check a Folding Rule Joint for Wear and Measurement Error
A folding rule is only as accurate as its joints. A rule can have clear graduations and straight sections, yet
Equipment
Steel Rule vs Combination Square for Marking a Shallow Setback
What a shallow setback requires A shallow setback is a short distance marked in from an edge, often 1/8 to
What to Look for in a Carpenter’s Tool Belt for Hand-Tool Work
A carpenter’s tool belt for hand-tool work should keep essential tools close without turning every movement into a weight-training exercise.
Best Marking Gauges for Scribing a Consistent Rabbet Width
A rabbet is only as consistent as the line that defines it. If the shoulder wanders by 1/32 inch, the
How to Use a Sliding T-Bevel to Transfer a Timber Frame Angle
A sliding T-bevel is one of the simplest ways to copy an angle from a timber frame drawing, an existing
How to Lay Out a Centered Mortise on a Timber Stile
Tools and dimensions A centered mortise is positioned equally between the two faces of a stile. The key is to
Equipment
Best Carpenter’s Pencils for Marking Fine Lines on Hardwood
Marking hardwood is less forgiving than marking construction lumber. A thick carpenter’s pencil can leave a line that is easy
Equipment
Best Tape Measures for Reading Short Measurements in Dim Light
Short measurements are where a tape measure either earns its place in a tool belt or becomes a source of