Updated Nov 22, 2026· 10 min read

Key takeaways

  • Compare drill bit sharpeners for sharp bits and clean holes, from bench machines to grinder attachments that restore dull edges fast and true.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

A dull drill bit does more than slow a job down. It wanders off the mark, tears the surface instead of cutting it, heats up fast, and leaves holes that are rough or out of round. Replacing bits every time they lose their edge gets expensive in a busy shop. A drill bit sharpener brings a worn edge back to a clean, even point so the bit cuts the way it should.

Our top pick: Drill Doctor 750X Drill Bit Sharpener. Runner-up: Woodcut Tools Drill Bit Sharpener Attachment.

The right sharpener depends on the bits you own and the tools already on your bench. A dedicated benchtop machine suits a shop that sharpens often. A bench grinder attachment fits a shop that already owns a grinder. An angle grinder attachment suits someone who wants a small, low-cost way to touch up bits on site. A multifunction station covers drill bits plus chisels and scissors in one unit.

As an Amazon Associate, we earn from qualifying purchases.

Sections
  1. Quick Answer
  2. How to Choose a Drill Bit Sharpener
  3. 1. Drill Doctor 750X Drill Bit Sharpener
  4. 2. Woodcut Tools Drill Bit Sharpener Attachment
  5. 3. CCXYYFDJ 96W Multifunction Sharpening Station
  6. 4. DeeDrr Drill Bit Sharpener Attachment for 125mm Angle Grinders
  7. 5. Hilitand Drill Bit Sharpener Angle Grinder Attachment
  8. Who Should Skip a Drill Bit Sharpener
  9. Final Verdict
  10. Frequently Asked Questions
  11. Product and ASIN Reference

Quick Answer

For most workshops, the Drill Doctor 750X is the strongest all-round pick: it handles bits from 3/32 to 3/4 inch, adjusts the point angle from 115 to 140 degrees, and uses a 180-grit diamond wheel with a guided chuck. If you already own a bench grinder, the Woodcut Tools attachment is a solid alternative, and the DeeDrr and Hilitand attachments cover 2 to 13 mm bits for quick touch-ups.

How to Choose a Drill Bit Sharpener

Bit size range comes first. Twist bits for general woodworking and metalwork usually fall between 1/8 and 1/2 inch, but a shop that drills large holes may need a sharpener that reaches 3/4 inch. A sharpener that tops out below your largest bit leaves that bit unsharpened.

Point angle matters next. The standard point angle for general-purpose drilling is 118 degrees, and most sharpeners in this guide cover it. Harder materials such as stainless steel often drill better with a flatter point around 135 degrees. An adjustable angle range lets you match the angle to the material.

Bit material limits what a sharpener can restore. Most sharpeners here handle high-speed steel, cobalt, carbide-tipped, and titanium nitride coated bits. Masonry bits need a sharpener that lists them explicitly. Step bits, Forstner bits, spade bits, auger bits, and brad-point bits do not sharpen well on a standard twist-bit sharpener.

Think about what the sharpener needs from you. A benchtop machine is self-contained: plug it in, set the angle, and sharpen. An attachment needs the grinder it mounts to, so confirm the grinder size and type it fits. A multifunction station adds chisel and scissor sharpening, which is handy in a mixed shop but means the drill bit port is one station among several. Also check the wheel: diamond wheels hold their shape and cut hard bit materials well, and a replaceable wheel extends the life of the sharpener.

1. Drill Doctor 750X Drill Bit Sharpener

The Drill Doctor 750X is the most capable dedicated machine in this guide and the natural pick for a shop that sharpens bits often. It is a benchtop unit built around a guided chuck and an alignment port, so each bit goes back in at the same angle and projection every time. That repeatability is what separates it from freehand grinding: both cutting edges come out even, which makes a hole round and true.

Its range is the widest here. It sharpens standard twist bits and masonry bits from 3/32 to 3/4 inch, covering the sizes most workshops use and the larger bits that smaller machines cannot take. The point angle adjusts continuously from 115 to 140 degrees, so you can set 118 degrees for general work in wood and aluminum or move toward 135 to 140 degrees for harder metals. Split-point capability is included, which helps bits bite without wandering on smooth metal.

Inside the unit is a 180-grit diamond sharpening wheel, pre-installed and replaceable, with adjustable material take-off so you control how much metal each pass removes. The unit runs on standard 120V AC power and comes with a hard-shell carrying case, a user guide, and a wheel hub wrench. A three-year manufacturer warranty covers the unit.

Specs

    • Bit range: 3/32 to 3/4 inch
    • Point angle: 115 to 140 degrees, adjustable
    • Sharpening wheel: 180-grit diamond, replaceable
    • Bit types: high-speed steel, carbide, cobalt, titanium nitride coated, masonry, split point
    • Power: 120V AC
    • Model: DD750x-W
    • UPC: 662949039697
    • Warranty: 3 years

    2. Woodcut Tools Drill Bit Sharpener Attachment

    The Woodcut Tools sharpener is an attachment for a bench grinder rather than a standalone machine, and that is its main appeal: if you already own a bench grinder, it turns a tool you have into a guided drill bit sharpener without adding another motor to the bench. The attachment holds the bit at a set angle against the wheel, which is far more consistent than holding a bit freehand.

    Its adjustable bevel is the feature that sets it apart from simpler jigs. The angle scale runs from 20 to 140 degrees, and the bit holder jaw adjusts to the diameter of the bit, so you can configure the setup for the bit in hand in seconds. It sharpens bits from 1/8 to 1/2 inch, which covers the most-used twist bit sizes in a woodworking and general repair shop.

    Because it is an attachment, its results depend on the grinding wheel it works with: a good wheel in sound condition gives clean, even edges, and the guided holder keeps both lips symmetrical. ### Specs

    • Type: bench grinder attachment
    • Bit range: 1/8 to 1/2 inch
    • Angle scale: 20 to 140 degrees
    • Bit holder: adjustable jaw for bit diameter
    • Bit types: twist drill bits

    3. CCXYYFDJ 96W Multifunction Sharpening Station

    The CCXYYFDJ station is a multifunction unit with three sharpeners in one housing: one for drill bits, one for chisels, and one for scissors. That makes it the most versatile pick in this guide for a mixed shop, since a single small machine covers three edge tools. The drill bit port is one station among the three, so it is best viewed as a general-purpose sharpener rather than a dedicated drill bit machine.

    For drill bits, it handles sizes from 3.5 to 13 mm, which covers the common metric range used in home workshops. The chisel sharpener adjusts from 15 to 50 degrees, and the scissor station takes blades up to 5 mm thick. The unit runs on a 96W copper core motor at 1350 revolutions per minute, in a compact plastic housing about 14.3 by 16.2 by 15.5 cm.

    The maker notes that the station is mainly for household use and is not suited to high-precision work, and it cannot grind kitchen knives.

    Specs

      • Type: multifunction sharpening station, 3 stations
      • Drill bit range: 3.5 to 13 mm
      • Chisel angle: 15 to 50 degrees, adjustable
      • Scissor capacity: blades up to 5 mm thick
      • Power: 96W, 110V
      • Motor: copper core, 1350 revolutions per minute
      • Size: 14.3 x 16.2 x 15.5 cm
      • UPC: 761099924690

      4. DeeDrr Drill Bit Sharpener Attachment for 125mm Angle Grinders

      The DeeDrr attachment is a small, simple jig that mounts on a 125mm angle grinder and turns it into a drill bit sharpener. It is the most portable pick in this guide: it weighs about 7 ounces, measures about 7.2 by 6.18 by 1.73 inches, and comes with three screws for mounting. There is no motor or cord, since the grinder supplies the power.

      It sharpens standard drill bits from 2 to 13 mm, which covers the full range of twist bits most home workshops use. The listing states compatibility with 125mm angle grinders, the common 5-inch size found in many shops. The attachment holds the bit at a fixed angle against the grinding wheel so the point comes out even on both sides.

      Specs

        • Type: angle grinder attachment
        • Grinder fit: 125mm angle grinders
        • Bit range: 2 to 13 mm
        • Bit types: high-speed steel, carbide, twist bits
        • Model: RZ-1
        • Color: Orange
        • Weight: 7 ounces
        • Size: 7.2 x 6.18 x 1.73 inches
        • Included: 3 screws

        5. Hilitand Drill Bit Sharpener Angle Grinder Attachment

        The Hilitand attachment is the second angle grinder jig in this guide, and it is easy to confuse with the DeeDrr at a glance: both are orange, both cover 2 to 13 mm bits, and both mount on an angle grinder. The differences are in the build and the model. The Hilitand is an ABS-bodied attachment with its own model number, Hilitandf37wbr462v-11, a weight of about 4.7 ounces, and dimensions of about 14 by 15.5 by 3 cm. It ships with three screws and carries a 90-day manufacturer warranty.

        It sharpens high-speed steel, carbide, and twist bits from 2 to 13 mm, the same core range as the DeeDrr. You attach it to the angle grinder, adjust the grinding angle to suit the bit, and run the bit against the wheel through the guide. The ABS body keeps it light in the hand, and its compact size makes it easy to carry to a job site.

        Specs

          • Type: angle grinder attachment
          • Bit range: 2 to 13 mm
          • Bit types: high-speed steel, carbide, twist bits
          • Material: ABS
          • Model: Hilitandf37wbr462v-11
          • Color: Orange
          • Weight: 4.7 ounces
          • Size: 14 x 15.5 x 3 cm
          • Included: 1 sharpener, 3 screws
          • Warranty: 90 days, manufacturer

          Who Should Skip a Drill Bit Sharpener

          A sharpener is not the right buy for every workshop. If you drill only a few holes a month and your bits are inexpensive, replacing a dull bit may be simpler than learning a sharpening routine. If your work uses mainly step bits, Forstner bits, spade bits, auger bits, or brad-point bits, a standard twist-bit sharpener will not restore them.

          Attachments are also the wrong choice if you do not own the grinder they mount to. A bench grinder attachment needs a bench grinder in good condition, and an angle grinder attachment needs an angle grinder of the right size. Buying the grinder just to use the attachment usually costs more than buying a self-contained machine. If your bits are chipped, snapped, or worn far below their original diameter, sharpening will not bring them back.

          Final Verdict

          The Drill Doctor 750X is the best all-round drill bit sharpener in this guide for a shop that sharpens often: the widest bit range, the most adjustable point angle, and a guided chuck that keeps both cutting edges even. The Woodcut Tools attachment is the best choice for a shop that already owns a bench grinder. The CCXYYFDJ station is the best pick for a mixed home workshop that also wants chisel and scissor sharpening in one compact unit. The DeeDrr and Hilitand attachments are the best low-cost touch-up options for anyone who already owns an angle grinder, with the DeeDrr stating its 125mm fit and the Hilitand offering a lighter ABS body.

          Frequently Asked Questions

          What point angle should I sharpen a general-purpose drill bit to?

          A 118-degree point is the standard for general-purpose drilling in wood, plastic, and mild steel, and most sharpeners in this guide cover it. For harder metals such as stainless steel, a flatter point around 135 degrees often drills cleaner. A machine with an adjustable angle, such as the Drill Doctor 750X, lets you match the angle to the material.

          Can a drill bit sharpener handle masonry bits?

          Some can, and some cannot, so check the listing for each model. The Drill Doctor 750X lists masonry bits among the types it sharpens, along with high-speed steel, carbide, cobalt, and titanium nitride coated bits. Attachments built for twist bits may not suit masonry bits.

          Do angle grinder attachments need a specific grinder size?

          Yes. An angle grinder attachment mounts to a grinder of a stated size and will not fit one outside that size. The DeeDrr attachment in this guide states a 125mm grinder fit in its listing. Always match the grinder size you own against the listing before ordering.

          How do I know when a drill bit is too worn to sharpen?

          A bit that is chipped, snapped, or worn well below its original diameter is usually past sharpening, and replacement is the better call. A bit that is simply dull, with intact flutes and a point that has lost its edge, is a good candidate for sharpening. If the bit overheats or wanders after sharpening, it may be worn beyond recovery.

          Product and ASIN Reference

          Product ASIN
          Drill Doctor 750X Drill Bit Sharpener B07CSHX7SX
          Woodcut Tools Drill Bit Sharpener Attachment B07KFSRYZQ
          CCXYYFDJ 96W Multifunction Sharpening Station B0DTKCXSMJ
          DeeDrr Drill Bit Sharpener Attachment for 125mm Angle Grinders B0FCS8K832
          Hilitand Drill Bit Sharpener Angle Grinder Attachment B0F44SHCG9
          C
          Carpenter's Equip Editorial Team
          We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
          Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
          Best Drill Bit Sharpeners for Sharp Bits and…Check price on Amazon

          Related guides

          Browse all Equipment guides →

          More from Amazon

          Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

          Amazon Business

          A free business account with business pricing and bulk-buying tools for work, shop or home office.

          Create a business account
          Amazon Prime

          Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

          Start a Prime free trial
          Audible

          Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

          Try Audible free
          Amazon Music Unlimited

          Ad-free music streaming. Eligible new subscribers can start with a free trial.

          Try Music Unlimited free

          As an Amazon Associate we earn from qualifying purchases.