Updated Nov 22, 2026· 10 min read

Key takeaways

  • Organize screws, fasteners and small parts with the best parts bins: stackable bins, drawer cabinets and tilt-out organizers for benches and garages.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

Screws, bolts, washers, and connectors drift to the bottom of a drawer. A small-parts bin system ends that drift: each part number gets a labeled home. This guide compares five small-parts bins for workshops: a wide open-front bin, two drawer cabinets, a dividable grid box, and a tilt-out cabinet.

Our top pick: Akro-Mils AkroBins 30250. Runner-up: Quantum PDC-18BK.

As an Amazon Associate, we earn from qualifying purchases.

Sections
  1. Quick Answer
  2. How to Choose Parts Bins
  3. 1. Akro-Mils AkroBins 30250 — The Wide Open-Front Bin
  4. 2. Quantum PDC-18BK — The Compact 18-Drawer Cabinet
  5. 3. Akro-Mils 10144 — The 44-Drawer Combo Cabinet
  6. 4. Akro-Mils Akro-Grid 33166 — The Dividable Grid Box
  7. 5. Akro-Mils TiltView 6705 — The Tilt-Out Cabinet
  8. Who Should Skip Parts Bins
  9. Final Verdict
  10. Frequently Asked Questions
  11. Product and ASIN Reference

Quick Answer

For most workshops, the Akro-Mils 10144 44-drawer cabinet is the strongest all-round pick, with two drawer sizes and included dividers. For bulky fittings, the Akro-Mils 30250 open-front bin holds heavy loads on a rack. For a compact bench cabinet, the Quantum PDC-18BK gives 18 clear drawers in a small footprint. For kitting, the Akro-Grid 33166 splits one box into many lanes, and the Akro-Mils TiltView 6705 gives dust-free tilt-out access.

How to Choose Parts Bins

Match the format to the part before anything else. Open-front bins suit bulky items you grab by hand: hinges, brackets, large bolts, and fittings. Drawer cabinets suit small fasteners that need many labeled locations. Tilt-out cabinets suit parts you reach for often but want covered between jobs. Grid boxes suit kitting, where one job needs many small groups of parts in a single container.

Measure the wall and the bench next. Open-front bins need a louvered panel, a rail, or shelf depth, and a wide bin needs real width. Drawer cabinets are deep, so check bench depth and wall space. A tilt-out cabinet needs clearance in front for the bins to swing out.

Count drawers and lanes against your part list. A cabinet with 18 drawers suits a modest stock of screws and fasteners. A 44-drawer cabinet suits a shop with many sizes and types. A grid box suits a kit with dozens of small groups, but only with the dividers that fit it. Count the lanes you need, then add room for growth.

Check the divider supply. Some cabinets include dividers packed with the unit. Some bins take dividers that are sold separately, and the divider model matters: a divider made for one bin size will not fit another. Order dividers with the bin, matching the part number to the bin model.

Mind the material. Polypropylene bins resist water, rust, and weak acids, and they survive drops that would crack a brittle box. High-impact polystyrene cabinets are rigid and stack well, and clear drawers show contents without opening. In a damp or dusty shop, a closed drawer or tilt-out bin protects small parts better.

1. Akro-Mils AkroBins 30250 — The Wide Open-Front Bin

The Akro-Mils 30250 is the wide workhorse of this group. At 14-3/4 inches long and 16-1/2 inches wide, it holds bulky fittings, full kits, and heavy parts in a single open-front location, and it is rated to 75 pounds on a rack. The open front means you reach in and grab what you need without opening a drawer, which suits parts you handle often. It stacks on shelving or hangs on louvered panels and rails.

The bin is one piece of high-density polypropylene, which resists water, rust, corrosion, and weak acids, and it can be autoclaved up to 250 degrees Fahrenheit. Three length-divider slots take 40245 dividers for up to four lanes, and 41250 width dividers split the bin crosswise. Dividers are sold separately, so order them with the bin. The 30250 ships as a carton of six bins in one color: red, yellow, blue, green, black, stone, or clear.

Specs

    • Material: One-piece high-density polypropylene
    • Outside dimensions: 14-3/4 x 16-1/2 x 7 inches
    • Inside dimensions: 14 x 14-3/4 x 6-3/4 inches
    • Load capacity: 75 lb on a rack
    • Pack: 6 per carton, one color
    • Mounting: Stacks on shelving, hangs on louvered panels and rails
    • Dividers: 40245 and 41250, sold separately

    2. Quantum PDC-18BK — The Compact 18-Drawer Cabinet

    The Quantum PDC-18BK is the compact bench cabinet of this group. It packs 18 clear drawers into a cabinet that measures 6-1/4 inches deep, 15 inches wide, and 18-3/4 inches tall, which suits a bench corner, a shelf, or a wall where space is tight. The clear polypropylene drawers show contents at a glance, and each drawer comes with a divider, doubling the lanes.

    The frame is heavy-duty polypropylene in black, with drawer stops that keep a drawer from sliding out and spilling its contents. That matters: a drawer that tips out spreads screws across the floor. The cabinet stacks and wall-mounts, so a second unit needs no new bench. Eighteen drawers suit a modest stock: screws in a few sizes, washers, nuts, and a handful of connectors.

    Specs

      • Drawers: 18 clear polypropylene drawers, dividers included
      • Outside dimensions: 6-1/4 x 15 x 18-3/4 inches
      • Frame: Heavy-duty polypropylene, black
      • Drawer stops: Yes, prevent spills
      • Mounting: Stacks, wall-mountable

      3. Akro-Mils 10144 — The 44-Drawer Combo Cabinet

      The Akro-Mils 10144 is the largest drawer cabinet in this guide, and the strongest all-round pick for most workshops. It holds 44 drawers in a 20-inch wide frame: 12 large drawers and 32 small drawers. That mix suits many part numbers: large drawers take bigger fasteners, small drawers take tiny screws and pins. The 20-inch wide cabinet stacks or wall-mounts through molded keyhole slots.

      Dividers are included, not extra: four large dividers and eight small dividers come molded into the back of the frame, so the lane count can nearly double without a separate order. The clear, unbreakable polypropylene drawers show contents at a glance, and finger-grip pulls open easily with greasy hands. Rear stop tabs prevent slide-outs, and a pedestal base is included.

      Large drawers measure 4-7/8 by 4-1/4 by 2 inches inside and small drawers 5-1/4 by 1-11/16 by 1-1/2 inches, so check the largest part you store against those sizes. The frame is high-impact polystyrene in black, made in the USA, with a one-year limited warranty. One caution: an older crawl of the red variant showed no featured offers, so confirm the listing is live before ordering.

      Specs

        • Drawers: 44 total, 12 large and 32 small, clear polypropylene
        • Outside dimensions: 20 x 6-3/8 x 15-13/16 inches
        • Large drawer inside: 4-7/8 x 4-1/4 x 2 inches
        • Small drawer inside: 5-1/4 x 1-11/16 x 1-1/2 inches
        • Dividers: 4 large and 8 small included
        • Frame: High-impact polystyrene, black; pedestal base included
        • Mounting: Stacks on other cabinets, wall-mounts with keyhole slots

        4. Akro-Mils Akro-Grid 33166 — The Dividable Grid Box

        The Akro-Mils Akro-Grid 33166 is the kitting box of this group. One 6-inch deep box divides into as many as 96 separate compartments, with seven long and eleven short divider slots running in both directions, creating compartments as small as 1-1/8 inches square. That density suits a job kit: one box can carry every screw, washer, and connector for an assembly in labeled lanes.

        The box measures 16-1/2 by 10-7/8 by 6 inches outside, with an inside bottom of 14-3/4 by 9-1/8 by 5-9/16 inches, and it holds 0.44 cubic feet with a 35-pound load limit. The industrial-grade polymer resists most solvents and chemicals, which suits parts that carry oil or cutting fluid. The same footprint also comes in 2.5, 4, 5, and 8-inch heights, so the depth can match the part.

        Dividers and lids are sold separately and are model-specific: long dividers are model 42166 and short dividers are model 41166, and the optional clear snap-on lid is model 33061. Order dividers with the box, sizing by the inside bottom dimensions, not the outside. The box ships as a carton of eight. One caution: a crawl from 198 days ago showed no featured offers, so confirm the listing is live before ordering. The 33166 is stack-only, so it does not hang on a louvered panel.

        Specs

          • Compartments: Up to 96, as small as 1-1/8 inches square
          • Outside dimensions: 16-1/2 x 10-7/8 x 6 inches
          • Inside bottom: 14-3/4 x 9-1/8 x 5-9/16 inches
          • Volume: 0.44 cubic feet; load limit: 35 lb
          • Divider slots: 7 long, 11 short; dividers sold separately
          • Divider models: Long 42166, short 41166; optional lid 33061
          • Pack: 8 per carton; gray, blue, red

          5. Akro-Mils TiltView 6705 — The Tilt-Out Cabinet

          The Akro-Mils TiltView 6705 is the only tilt-out cabinet in this guide, and the pick for parts you reach for often but want covered between jobs. Five clear bins tilt open smoothly, stay closed for dust-free storage, and lift out for refilling. Each bin has a large handle with a label slot, and the bins close securely to keep dust and chips out.

          The cabinet measures 23-5/8 inches wide, 6-1/2 inches high, and 5-5/8 inches deep, in Stone, and it is made from high-impact break-resistant polystyrene with clear polystyrene bins. It sits on a desktop, wall-mounts, or attaches to steel rails, frames, or louvered panels with an adapter. All TiltView sizes share the same 23-5/8-inch width, so units stack neatly together.

          Five bins suit a small set of high-use parts: the screws, connectors, or fittings that a bench uses every day. It is not a bulk cabinet, and it holds fewer part numbers than the 44-drawer 10144, so it suits a focused bench rather than a full stockroom. This is the only TiltView pick in this guide: the Mocha Raspberry version of the same cabinet is a color variant, not a second product. One caution: an older crawl showed no featured offers, while a tracker record shows the listing current in March 2026, so confirm it is live before ordering.

          Specs

            • Bins: 5 tilt-out bins, clear polystyrene, removable
            • Cabinet dimensions: 23-5/8 x 6-1/2 x 5-5/8 inches
            • Cabinet material: High-impact polystyrene, Stone color
            • Bin features: Tilt out, close for dust protection, label slots
            • Mounting: Desktop, wall-mount, steel rails, frames, or louvered panels with adapter
            • Stacking: Stacks with other TiltView cabinets, same 23-5/8-inch width

            Who Should Skip Parts Bins

            Skip a full bin system if the shop holds only a few part types in a single toolbox. A bin wall earns its space when part numbers multiply; with a handful of sizes, a divided tray does the job. Skip open-front bins if the shop is dusty or the bins sit near a saw, since open fronts collect chips and dust on small parts. A drawer or tilt-out cabinet protects stock better in that setting.

            Skip the widest bins if the wall is narrow: a 16-1/2-inch bin needs real panel width, and a row needs a full panel or a long shelf. Measure the wall first, and choose a bin or cabinet that fits the space you have. Skip grid boxes if you will not order dividers with them: without dividers, a grid box is one large tote. Skip a tilt-out cabinet if the bench has no clearance in front of it, since the bins swing out toward the user.

            Final Verdict

            For most workshops, the Akro-Mils 10144 44-drawer cabinet is the pick to buy first. Two drawer sizes, included dividers, and a stackable frame cover the widest range of parts in one unit. Add the Akro-Mils 30250 for bulky fittings and the Quantum PDC-18BK for a compact bench cabinet. For kitting, the Akro-Grid 33166 splits one box into many labeled lanes, and the Akro-Mils TiltView 6705 keeps five high-use bins covered and within reach.

            Frequently Asked Questions

            How many part numbers can a 44-drawer cabinet hold?

            The Akro-Mils 10144 holds 44 drawers, and the included dividers can nearly double the lane count, so it suits a shop with many sizes and types. Count the part numbers you store and match the drawer size to the largest part in each lane.

            Do open-front bins need a louvered panel?

            Open-front bins like the Akro-Mils 30250 hang on louvered panels and rails, but they also stack on shelving. A panel gives the most flexible layout, while a shelf run works when wall space is tight. Check the bin width against the panel or shelf before ordering.

            Are dividers included with parts bins?

            It depends on the model. The Quantum PDC-18BK includes a divider in every drawer, and the Akro-Mils 10144 includes four large and eight small dividers. The Akro-Mils 30250 and the Akro-Grid 33166 take dividers that are sold separately, so order the matching divider model with the bin.

            Can tilt-out bins be removed for refilling?

            Yes. The bins on the Akro-Mils TiltView 6705 tilt out smoothly and lift out of the cabinet for refilling, cleaning, or carrying to a workstation. They close securely for dust protection when the cabinet is not in use.

            Product and ASIN Reference

            Product ASIN
            Akro-Mils AkroBins 30250 B0006OKHBW
            Quantum PDC-18BK B07G2PFYX3
            Akro-Mils 10144 44-Drawer Cabinet B01MAV3GQ6
            Akro-Mils Akro-Grid 33166 B004C0450K
            Akro-Mils TiltView 6705 B008UR5456
            C
            Carpenter's Equip Editorial Team
            We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
            Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
            Best Parts Bins for Small Parts and Workshop…Check price on Amazon

            Related guides

            Browse all Equipment guides →

            More from Amazon

            Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

            Amazon Business

            A free business account with business pricing and bulk-buying tools for work, shop or home office.

            Create a business account
            Amazon Prime

            Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

            Start a Prime free trial
            Audible

            Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

            Try Audible free
            Amazon Music Unlimited

            Ad-free music streaming. Eligible new subscribers can start with a free trial.

            Try Music Unlimited free

            As an Amazon Associate we earn from qualifying purchases.