Updated Nov 21, 2026· 10 min read

Key takeaways

  • Compare five machine vises for mills and drill presses, from a compact 4-inch drill press vise to a 6-inch cross-slide model, with jaw and travel guidance.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

A machine vise is a different tool from the woodworking vise on a bench, and the difference decides whether a cut comes out square or wanders. A machine vise bolts to the table of a mill or a drill press, holds metal stock in hardened steel jaws, and keeps the workpiece from shifting while a cutter or a bit works through it. The jaws close parallel, the base sits flat on the table, and the screw pulls the moving jaw down and in so the part stays seated instead of lifting.

Our top pick: Accusize 4-Inch Super-Lock Precision Machine Vise. Runner-up: Wilton CS6 6-Inch Cross-Slide Drill Press Vise.

As an Amazon Associate, we earn from qualifying purchases.

Sections
  1. Table of Contents
  2. Quick Answer
  3. What Makes a Good Machine Vise
  4. 1. Accusize 4-Inch Super-Lock Precision Machine Vise
  5. 2. Wilton CS6 6-Inch Cross-Slide Drill Press Vise
  6. 3. TEKTON 53994 4-Inch Drill Press Vise
  7. 4. WEN DPA424 4-Inch Drill Press Vise
  8. 5. Yost LDPV-4 4-Inch Light Duty Drill Press Vise
  9. How to Choose a Machine Vise
  10. Who Should Skip a Heavy Machine Vise
  11. Frequently Asked Questions
  12. Final Verdict
  13. Product and ASIN Reference

Table of Contents

Quick Answer

For most small mills, the Accusize 4-Inch Super-Lock is the strongest all-around pick, with 4-inch jaws and accuracy rated to 0.0002 inch. The Wilton CS6 is the premium choice for large work, with 6-inch jaws and long cross-slide travel. The TEKTON 53994 and the WEN DPA424 cover everyday drilling at the budget end, and the Yost LDPV-4 suits light work on a small press.

What Makes a Good Machine Vise

A machine vise earns its place by holding still. The base must sit flat on the table with no rocking, and the mounting slots must line up with the table slots so the vise can be bolted down solidly. A base that rocks will never hold a tolerance no matter how good the jaws are.

Jaw accuracy comes next. On a milling vise, the jaw faces should be parallel and square to the base, so a part clamped once stays true through a cut. A precision vise holds parallelism and squareness to a couple of ten-thousandths of an inch, which matters when a part must fit a mating piece. An anti-lift screw design pulls the moving jaw down as it closes, while cross-slide vises add screws that move the vise body in two directions for rows of holes and slots without unclamping.

1. Accusize 4-Inch Super-Lock Precision Machine Vise

The Accusize 4-Inch Super-Lock is the precision pick in this roundup, and it earns the top spot by doing the one thing a milling vise must do: hold a part exactly where it was set. Its parallelism and squareness are rated to 0.0002 inch, a tolerance that keeps milled faces flat and mating parts fitting without shimming. The Super-Lock screw design pulls the moving jaw down as it tightens, so the workpiece stays seated on the bed instead of lifting at the jaw edge.

The 4-inch jaw width suits the benchtop mills and small knee mills most home shops run, holding bar stock, small plates, and brackets without crowding the table. The body is ductile iron, and the jaws are hardened steel with ground faces that resist scoring from steel workpieces. It mounts to the mill table through base slots with standard T-slot hardware. Indicate the fixed jaw square to the table once, lock the base down, and parts can be swapped in and out with the same zero from one session to the next.

Specs

  • Jaw width: 4 inches
  • Maximum jaw opening: 4 inches
  • Accuracy: 0.0002 inch parallelism and squareness
  • Mechanism: Super-Lock anti-lift screw design
  • Body material: Ductile iron
  • Jaws: Hardened steel with ground faces
  • Mounting: Base slots for mill table T-slot hardware
  • Tier: Premium

2. Wilton CS6 6-Inch Cross-Slide Drill Press Vise

The Wilton CS6 is the large vise in this roundup, and its size is the point. Its 6-inch jaws open a full 6 inches, with 2-inch-deep jaws that grip tall stock securely, and the cross-slide base moves the work 7-9/10 inch in both the X and Y directions. That travel turns a drill press into a light milling setup: a row of holes, a slot, or a bolt pattern can be cut by turning the slide cranks instead of unclamping the part.

The body is cast iron with hardened steel parts, and the jaws are hardened with V-grooves that hold round stock upright or on its side. Five bolt lugs around the base give plenty of mounting points, and the cranks carry fine marks for repeatable positioning. At 59 pounds, the CS6 is a two-hand lift, and it stands 7-1/4 inches tall, so measure the table and the space under the chuck before ordering.

Specs

  • Jaw width: 6 inches
  • Maximum jaw opening: 6 inches
  • Jaw depth: 2 inches
  • X travel: 7-9/10 inches
  • Y travel: 7-9/10 inches
  • Jaws: Hardened V-groove jaws for round stock
  • Mounting: Five bolt lugs
  • Body material: Cast iron with hardened steel parts
  • Weight: 59 pounds
  • Warranty: Lifetime warranty against manufacturing defects
  • Tier: Premium

3. TEKTON 53994 4-Inch Drill Press Vise

The TEKTON 53994 is the steady, no-drama choice in this roundup. It is a plain 4-inch drill press vise with no cross slide and no frills, built around a cast iron body, a steel screw, and a slotted base. There is nothing to adjust and nothing to wear out beyond the screw itself, and the vise does its one job, holding stock square under a drill bit, without fuss.

The 4-inch jaw width covers the stock most home shops drill, from small brackets to plates a few inches across. The jaws are textured to grip the workpiece and resist slipping during drilling, and the slotted base lets the vise be positioned anywhere on the press table and bolted down. It is not a milling vise: without a cross slide, any sideways positioning means unclamping and moving the part by hand. Used for what it is, a drilling vise, it holds flat stock, angle stock, and small plates square and steady.

Specs

  • Jaw width: 4 inches
  • Maximum jaw opening: 4 inches
  • Body material: Cast iron
  • Jaws: Textured steel jaws
  • Mounting: Slotted base for press table bolts
  • Mechanism: Steel screw with T-bar handle
  • Tier: Budget

4. WEN DPA424 4-Inch Drill Press Vise

The WEN DPA424 is the compact budget pick that refuses to feel flimsy. It is a 4-inch drill press vise built from heavy-duty cast iron, with a low profile that preserves clearance under the chuck on a benchtop press.

The 4-inch jaws open a full 4 inches, and the 1-inch throat depth keeps the vise low enough that thick stock still fits under the chuck. Four mounting slots in the base let the vise be bolted down in several positions, and at just over 7 pounds it is easy to lift on and off the table when the press needs to run free. The vise works best on single holes and short drilling runs, where the part is clamped once and the bit goes straight through. It is not built for side loads or milling passes.

Specs

  • Jaw width: 4 inches
  • Maximum jaw opening: 4 inches
  • Throat depth: 1 inch
  • Body material: Heavy-duty cast iron
  • Mounting: Four mounting slots in the base
  • Weight: Just over 7 pounds
  • Tier: Budget

5. Yost LDPV-4 4-Inch Light Duty Drill Press Vise

The Yost LDPV-4 is the lightest vise in this roundup, and its lightness is the feature. At 5.7 pounds, it is easy to carry, easy to position, and easy to remove, which suits a small benchtop press that gets reconfigured often. Its forged cast iron construction keeps the body rigid for its size, and the textured 4-inch jaws hold small workpieces firmly for light drilling.

The throat depth is 0.85 inch, which suits flat stock and small parts rather than tall blocks, and the slotted base lets it be bolted to the press table or clamped in place for quick jobs. In practice, it holds brackets for a single hole, grips small plates for a row of fasteners, and keeps model parts steady while a bit goes through. It is not the vise for thick steel plate or for long drilling sessions on heavy stock.

Specs

  • Jaw width: 4 inches
  • Throat depth: 0.85 inch
  • Body material: Forged cast iron
  • Jaws: Textured steel jaws
  • Mounting: Slotted base for press table bolts
  • Weight: 5.7 pounds
  • Tier: Budget

How to Choose a Machine Vise

Start with the machine, not the vise. Measure the table size, the slot spacing, and the space under the chuck with the vise in place. A vise that is too tall leaves no room for the bit and the work, and a vise that is too heavy will pull the press out of square.

Next, match the vise type to the work. A precision milling vise suits parts that must fit together, with tight tolerances and repeated setups. A cross-slide vise suits rows of holes, slots, and bolt patterns, where the work moves without unclamping. A plain drill press vise suits single holes and light drilling. Check jaw width, opening, and throat depth against the stock clamped most often, and look at the screw and slides: an anti-lift design keeps the workpiece seated during milling, and adjustable gibs keep cross slides smooth as they wear.

Who Should Skip a Heavy Machine Vise

A heavy machine vise is not right for every shop. If the work runs on a small benchtop press that moves between jobs, a 59-pound vise is dead weight, and a light drill press vise that comes off the table when the job is done fits that life better. If the press table is small, a wide vise will overhang the edges and rock under load, so a compact vise is the safer choice. Small-parts makers should think twice as well: a model maker who drills small brackets does not need a 6-inch jaw and a 6-inch opening, and a small vise gives better visibility and keeps the workpiece in reach.

Frequently Asked Questions

Can I use a machine vise on a woodworking bench?

A machine vise is built to bolt to a mill or drill press table, not to a wooden bench top. Its steel jaws would mark wood, and its base needs machine table slots. A woodworking vise with smooth jaws and wooden liners is the right tool for bench work.

What is the difference between a machine vise and a drill press vise?

A machine vise is built for milling, with ground jaws, tight tolerances, and an anti-lift screw that keeps the part seated under cutting loads. A drill press vise is built for drilling, with a simpler screw and looser tolerances, since the bit only pushes straight down.

How do I mount a machine vise so it stays square?

Clean the table and the vise base, set the fixed jaw square to the table edge with a square or an indicator, and bolt the vise down through at least two mounting points. Check the setup by clamping a test piece and drilling it, then measure the result.

Do I need a cross-slide vise for my drill press?

A cross-slide vise helps when the work needs rows of holes, slots, or bolt patterns without unclamping. For single holes, a plain drill press vise holds just as well and costs less.

Final Verdict

The best machine vise is the one that matches the machine and the work. For most small mills, the Accusize 4-Inch Super-Lock covers the widest range: 4-inch jaws, accuracy rated to 0.0002 inch, and an anti-lift screw that keeps parts seated. The Wilton CS6 is the premium choice for large work, with 6-inch jaws and long cross-slide travel. At the budget end, the TEKTON 53994 and the WEN DPA424 both give a solid 4-inch drill press vise for everyday holes.

Product and ASIN Reference

Product ASIN
Accusize 4-Inch Super-Lock Precision Machine Vise B09N9XRSFX
Wilton CS6 6-Inch Cross-Slide Drill Press Vise B009E0EA3A
TEKTON 53994 4-Inch Drill Press Vise B00FJXYKDQ
WEN DPA424 4-Inch Drill Press Vise B09Q4MP4BS
Yost LDPV-4 4-Inch Light Duty Drill Press Vise B07C1MC28S
C
Carpenter's Equip Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Machine Vises for Milling and Drill Press…Check price on Amazon

Related guides

Browse all Tools Workshop guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.