Updated Nov 19, 2026· 9 min read

Key takeaways

  • Compare the best auger bits for deep holes in wood and timber, from long single bits to full sets for clean, straight bores in timber framing in 2026.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

Deep holes ask more from a drill bit than shallow ones do. A bit that wanders at the surface keeps wandering all the way down, and a bit that cannot clear chips will bind halfway through a thick beam. Auger bits solve both problems with a screw tip that pulls the bit into the wood and a deep flute that carries waste out of the hole. They are the right tool for timber framing, log work, and deep through-holes for wiring and plumbing.

An auger bit is not the same as a spade bit, a Forstner bit, or a brad point bit. Spade bits cut fast but wander in deep holes, Forstner bits leave flat-bottomed holes and work best at shallow depth, and brad point bits give clean entry holes but lack the length and chip clearance for deep work. When the hole is deeper than a few inches, reach for the auger bit.

As an Amazon Associate, we earn from qualifying purchases.

Sections
  1. Quick Answer
  2. 1. Diablo DAG1900-S3 3-Piece Auger Bit Set
  3. 2. DEWALT DW1687 1-Inch by 17-Inch Ship Auger Bit
  4. 3. IRWIN SPEEDBOR Max 6-Piece Auger Bit Set
  5. 4. Bosch NKST20 Daredevil Auger Bit, 1-1/4 Inch by 7-1/2 Inch
  6. 5. Diablo DAG3110 1-Inch by 17-1/2-Inch Auger Bit
  7. How to Choose
  8. Who Should Skip These
  9. FAQ
  10. Final Verdict

Quick Answer

The DEWALT DW1687 1-inch by 17-inch ship auger is the first choice for most deep-hole work: long enough for timber, with a screw tip that pulls it straight. For several sizes, the Diablo DAG1900-S3 three-piece set covers the common diameters. The IRWIN SPEEDBOR Max six-piece set is a good value option, though one guide notes it may no longer be sold, so check availability before ordering.

1. Diablo DAG1900-S3 3-Piece Auger Bit Set

Check price on Amazon

The Diablo DAG1900-S3 is a three-piece auger bit set for woodworkers who drill deep holes in more than one size. A set makes sense when your work varies: one day you are boring a hole for a dowel, the next you are opening a passage for cable through a wall plate. Owning three sizes means you drill the hole the job needs instead of forcing one bit to do everything.

Diablo builds its auger bits for clean cutting in wood and timber. The screw tip draws the bit into the material, so you push less and the bit tracks straighter than a twist bit would at the same depth. The flutes lift chips out of a deep hole rather than packing them in, which matters most when the hole is too deep to see into. A bit that clears its own waste keeps cutting instead of binding.

Specs:

  • Brand: Diablo
  • Model: DAG1900-S3
  • Pieces: 3
  • Type: Auger bit set
  • Use: Deep holes in wood and timber
  • ASIN: B089KVTQ4X

2. DEWALT DW1687 1-Inch by 17-Inch Ship Auger Bit

Check price on Amazon

The DEWALT DW1687 is a single ship auger bit, 1 inch in diameter and 17 inches long, made for boring deep holes in timber. A ship auger is the classic deep-hole tool: a long body, a screw tip, and a single deep flute that pulls chips out behind the cutting edge. At 17 inches, this bit reaches through beams, posts, and thick laminated stock in one pass, without an extension.

One inch is a useful diameter for deep work. It clears a passage for wiring, plumbing, and threaded rod, and it matches common dowel and tenon sizes. The screw tip bites and pulls the bit forward, so the hole stays on line even when the grain tries to push it off course. Because the bit is long, you can drill from one face and exit cleanly on the other side of a thick member.

Specs:

  • Brand: DEWALT
  • Model: DW1687
  • Diameter: 1 inch
  • Length: 17 inches
  • Type: Ship auger bit
  • Use: Deep through-holes in timber
  • ASIN: B00004RGZI

3. IRWIN SPEEDBOR Max 6-Piece Auger Bit Set

Check price on Amazon

The IRWIN SPEEDBOR Max six-piece set covers more diameters than any other pick here, which makes it a good value choice for a shop that drills deep holes often and in varied sizes. Six bits in one case means you are less likely to be caught without the right diameter, and the SPEEDBOR line has long been a familiar name in wood boring.

A set like this earns its keep on mixed work: fence posts, deck framing, pergolas, and shop jigs all call for different hole sizes, and a single bit cannot cover them. The screw tips pull each bit into the wood, and the flutes clear chips so a deep hole does not pack tight halfway down. For a woodworker building out a first kit, this set plus a long single bit is a complete deep-hole setup.

One caution: a buying guide updated in late October 2026 notes this SPEEDBOR set may no longer be sold, so check availability before ordering. If it is unavailable, the Diablo set above covers the same ground.

Specs:

  • Brand: IRWIN
  • Model: 3041006
  • Pieces: 6
  • Type: SPEEDBOR Max auger bit set
  • Use: Deep holes in varied diameters
  • ASIN: B000LQ905E

4. Bosch NKST20 Daredevil Auger Bit, 1-1/4 Inch by 7-1/2 Inch

Check price on Amazon

The Bosch NKST20 Daredevil is a shorter auger bit, 1-1/4 inches in diameter and 7-1/2 inches long, for deep holes that do not need the full reach of a ship auger. A 1-1/4 inch hole is a common size for larger dowels, pipe passages, and heavy fasteners, and the shorter length keeps the bit stiff and easy to control in a hand drill.

Shorter auger bits have a real advantage in tight spaces. A 17-inch ship auger needs clearance behind the drill that a stud bay or a cabinet interior may not offer. At 7-1/2 inches, the NKST20 fits where long bits cannot, while still drilling far deeper than a standard twist bit. The screw tip does the pulling, so you guide the bit rather than forcing it, and the hole comes out round and on line.

Specs:

  • Brand: Bosch
  • Model: NKST20
  • Diameter: 1-1/4 inches
  • Length: 7-1/2 inches
  • Type: Daredevil auger bit
  • Use: Deep holes in joists, plates, and blocking
  • ASIN: B003BIFMOW

5. Diablo DAG3110 1-Inch by 17-1/2-Inch Auger Bit

Check price on Amazon

The Diablo DAG3110 is a single auger bit, 1 inch in diameter and 17-1/2 inches long, and it is the longest bit in this roundup. That extra half inch over the DEWALT matters when a hole must pass clean through a thick laminated beam or a pair of stacked members. Length is the one thing you cannot add to a bit you already own.

Like the other Diablo pick, this bit uses a screw tip to pull itself into the wood and a flute that carries chips out of the hole. The combination keeps the bit cutting straight at depths where a shorter bit would need an extension, and extensions add wobble to a deep hole. For timber framing, log cabin work, and deep wiring runs, a single long bit is often the only tool that does the job in one pass.

Specs:

  • Brand: Diablo
  • Model: DAG3110
  • Diameter: 1 inch
  • Length: 17-1/2 inches
  • Type: Auger bit
  • Use: Deepest through-holes in timber and laminated stock
  • ASIN: B089LDR9P6

How to Choose

Match the bit to the depth first. Measure the thickest member you will drill through and add a few inches for the chuck and for clearance behind the drill. A bit that is just long enough is better than one that is far too long, because extra length adds flex and wobble. For a single beam, a 7-1/2 inch bit is often enough; for timber framing, a 17-inch ship auger is the working length.

Match the diameter to the job, not to the bit you happen to own. Wiring and small dowels need a modest diameter, while pipe and large fasteners need a wide one. A set covers this range better than any single bit, and it costs less per bit than buying singles.

Check the shank before you buy. Ship augers often use a hex shank that fits impact chucks and quick-change drivers, while some auger bits use a straight shank for a standard drill chuck. A bit that does not fit your drill is useless, no matter how well it cuts. Also check that your drill has the torque for a screw-tip auger: a 1-inch or larger auger in dense hardwood can twist a small drill out of your hands, so a drill with a side handle and a low gear is the safe pairing.

Finally, consider the wood. Softwood drills easily with any auger. Hardwood and engineered timber need a sharp bit and a slower feed, and a dull bit will burn rather than cut. Keep a file handy and touch up the cutting edges before they go dull.

Who Should Skip These

Skip auger bits if your holes are shallow. A spade bit or a Forstner bit drills a shallow hole faster, and the Forstner leaves a cleaner flat bottom. Auger bits earn their keep at depth; at shallow depth they are slower than the alternatives.

Skip them for metal and masonry. Auger bits are wood tools: a screw tip has nothing to bite in metal, and the cutting edges will dull quickly on hard material. Use a step drill bit for thin metal and a masonry bit for brick and concrete.

Skip the long ship augers if you work mostly in tight spaces. A 17-inch bit needs room behind the drill, and in a stud bay or inside a cabinet you may not have it. The shorter Bosch pick or a compact bit set fits those jobs better.

FAQ

How deep can an auger bit drill?

As deep as the bit is long, minus the length held in the chuck. A 17-inch ship auger drills a hole close to 15 inches deep in one pass. For deeper holes, an extension adds length but also wobble, so a single long bit gives a straighter hole.

Can I use an auger bit in a cordless drill?

Yes, if the drill has enough torque and the chuck fits the shank. A screw-tip auger pulls hard and can twist a small drill, so use a drill with a side handle and a low gear. For 1-inch and larger bits in hardwood, a corded drill is the safer choice.

What is the difference between an auger bit and a spade bit?

An auger bit has a screw tip and a deep flute, so it pulls itself into the wood and clears chips from a deep hole. A spade bit has a flat paddle shape that cuts fast in shallow holes but wanders at depth. Use the auger for deep holes and the spade for shallow ones.

How do I keep a deep hole straight?

Let the screw tip do the work and keep the drill square to the surface as you begin. Check alignment from two sides before the bit is deep, because you cannot correct a hole once the bit is buried. Pull the bit out partway to clear chips, then continue at the same angle.

Final Verdict

The DEWALT DW1687 is the first choice for most deep-hole work: a 1-inch by 17-inch ship auger that reaches through timber in one pass and tracks straight on its screw tip. Add the Diablo DAG1900-S3 set when you need several diameters, and the Diablo DAG3110 when your deepest holes push past 17 inches. The Bosch NKST20 covers wide, shorter holes in tight spaces, and the IRWIN SPEEDBOR Max set is a good value option if it is still available. Measure your deepest member, match the bit to it, and let the screw tip pull.

C
Carpenter's Equip Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Auger Bits for Deep Holes in Wood…Check price on Amazon

Related guides

Browse all Uncategorized guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.