Updated Nov 19, 2026· 9 min read

Key takeaways

  • Learn how to choose a bench hook for safe, square saw cuts at your workbench. Compare ready-made hooks, sizes and materials before you buy today.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

A bench hook is one of the simplest and most useful appliances in a woodworking shop. It is a flat board with a stop on top at one end and a hook underneath at the other end. The hook catches the edge of the workbench so the board cannot slide, and the stop holds the workpiece still while you saw, plane or chisel.

The honest truth about bench hooks is that most woodworkers build their own. The design has barely changed in hundreds of years, and a bench hook made from scrap plywood and two offcuts works as well as anything you can buy. Ready-made bench hooks are rare, and the ones sold today mostly come from printmaking, where a bench hook holds a lino block steady while it is carved.

As an Amazon Associate, we earn from qualifying purchases.

Sections
  1. Quick Answer
  2. 1. ESSDEE BH1 Bench Hook
  3. 2. Ubamdom Bench Hook Metal Inking Plate 4-Pack
  4. 3. Speedball Super Value Block Printing Starter Kit 3471
  5. 4. Speedball Deluxe Block Printing Kit
  6. 5. Speedball Block Printing Fabric Deluxe Kit
  7. How to choose a bench hook
  8. Who should skip a ready-made bench hook
  9. FAQ
  10. Final verdict

Quick Answer

Buy the ESSDEE BH1 if you want a ready-made wooden bench hook for carving and small saw cuts. The Ubamdom 4-pack suits metal plate work. The three Speedball kits below each include a bench hook with inks and cutters, which makes them the best route for printmakers. If you saw wood daily, build a plywood bench hook to your own size.

1. ESSDEE BH1 Bench Hook

Check price on Amazon

The ESSDEE BH1 is the closest thing to a classic woodworking bench hook that you can buy ready-made. It is a wooden board measuring 300 by 200 mm, with a stop across the top and a hook underneath, and it works for either hand. The design is sold as a lino cutting support.

The board is thick enough to stay flat under a saw cut and light enough to move around the bench. At 440 grams it sits firmly without clamps, and the stop is tall enough to hold a lino block or a thin board steady.

Specs: Size 300 by 200 mm; Material wood; Design ambidextrous; Weight 440 grams; Model 71090001; Suits lino carving and small saw cuts; ASIN B0055DIYD2

The BH1 suits carvers and printmakers who want a bench hook without building one. It is the right size for small work. For large boards, a bigger shop-made hook will serve better.

2. Ubamdom Bench Hook Metal Inking Plate 4-Pack

Check price on Amazon

The Ubamdom set takes a different approach: four metal bench hooks in one pack, each measuring 9 by 7 inches and 1 inch thick. Each plate is black iron, with a lip that hooks over the bench edge. The metal surface doubles as an inking plate.

A four-pack suits a classroom, a shared studio or a workshop where several people work at once. The iron construction resists cuts from carving tools better than a wooden board, though it will show marks over time.

Specs: Pieces 4 plates; Size 9 by 7 by 1 inches; Material iron; Color black; Design bench hook and inking plate; Suits linocut and block printing; ASIN B0GCZ5R9GL

The Ubamdom set suits printmakers and carvers who want a metal bench hook, and teachers who need several plates for a class. It is less suited to heavy woodworking, because the metal plate is smaller than a shop-made wooden hook and hard on saw teeth.

3. Speedball Super Value Block Printing Starter Kit 3471

Check price on Amazon

The Speedball 3471 is a starter kit that includes a bench hook among its contents. The kit contains ink, a brayer, a lino handle and cutters, and a Speedy-Carve block, along with the Speedball bench hook and inking plate. The bench hook is a metal plate with a lip that hooks over the table edge and doubles as an inking surface.

Buying the kit is the most practical way to get a Speedball bench hook, because the plate is rarely sold on its own. The kit covers everything a beginner printmaker needs to make a first block print, and the bench hook keeps the block steady while it is carved.

Specs: Kit contents ink, brayer, lino handle and cutters, Speedy-Carve block, bench hook; Bench hook metal plate with lip; Model 3471; Suits block printing beginners; ASIN B000SKT0US

The 3471 suits anyone beginning block printing who needs a bench hook as part of a complete kit. It is not the right purchase for a woodworker who only wants a bench hook, because most of the kit is printmaking supplies.

4. Speedball Deluxe Block Printing Kit

Check price on Amazon

The Speedball Deluxe kit is the fuller version of the starter kit, and it also includes a bench hook and inking plate. The contents cover color inks, a brayer, a bench hook, cutters, a Speedy-Carve block and a mounted linoleum block.

The Deluxe kit suits a printmaker who wants to work in color and on both soft and mounted blocks. The bench hook holds the block steady during carving, and the plate serves as the inking surface when the block is ready to print.

Specs: Kit contents inks, brayer, bench hook, lino handle and cutters, Speedy-Carve block, mounted linoleum block; Bench hook metal plate with lip; Suits block printing in color; ASIN B0027AGDWK

The Deluxe kit suits printmakers who want a complete set with color inks and a mounted block as well as a bench hook. Woodworkers looking only for a saw stop should look at the ESSDEE hook or build their own instead.

5. Speedball Block Printing Fabric Deluxe Kit

Check price on Amazon

The Speedball Fabric Deluxe kit contains fourteen pieces: inks, a brayer, a bench hook, a lino handle and cutters, and Speedy-Carve relief blocks. The bench hook is the same metal plate with a lip, and it holds fabric blocks steady while they are carved. The fabric inks are made for printing on cloth.

The kit suits anyone who wants to print on fabric, tote bags and clothing. The bench hook keeps the block from sliding while it is carved, and the plate doubles as an inking surface for the fabric ink.

Specs: Pieces 14; Kit contents inks, brayer, bench hook, lino handle and cutters, Speedy-Carve relief blocks; Bench hook metal plate with lip; Suits fabric block printing; ASIN B0BMGRZQXN

The Fabric Deluxe kit suits crafters and printmakers who want to move from paper to fabric. It is the only kit in this group aimed at textiles. For woodworking saw cuts it is not the right tool, but for fabric block printing it is a complete first purchase.

How to choose a bench hook

Size comes first. The bed should be wide enough for the workpiece and long enough to support it without tipping. A bed around 300 mm long and 200 mm wide suits small work such as lino blocks and short boards. Larger work needs a longer bed, and a shop-made hook can be sized to the bench and the work without limit.

Material sets the character of the hook. Wood is the classic choice: it is kind to saw teeth, easy to cut into when the saw runs past the workpiece, and simple to replace when it wears out. A wooden hook is also easy to make square. Metal plates suit printmaking and carving, where the surface doubles as an inking plate.

Stop height matters more than most buyers expect. A stop around 16 mm tall holds thin stock firmly and guides a saw squarely, while a taller stop of 25 to 38 mm suits thicker boards. A stop that is too short lets the workpiece slip over it, and one that is too tall blocks the saw.

A bench hook works for either hand when the stop runs across the full width of the bed. Some commercial hooks are shaped for one hand only, so check before buying. A symmetrical hook can be flipped over and used as a small shooting board.

Weight and stability decide whether the hook stays put. A hook that is too light slides across the bench when you push a saw through the work. If a ready-made hook slides, clamp it lightly to the bench.

Buy or build is the real decision. A ready-made hook suits carvers and printmakers who need one now and work with small pieces. A shop-made hook suits woodworkers who saw daily, because it can be sized to the bench and replaced cheaply when it wears out. Building one takes three pieces of scrap and about half an hour.

Who should skip a ready-made bench hook

Skip a ready-made hook if you saw boards longer than about 300 mm on a regular basis. The commercial hooks here are sized for lino blocks and small work, and a long board will tip off the end of a small bed. Build a hook from plywood sized to your bench instead.

Skip it too if you need a hook for heavy planing. A bench hook holds work by friction and by the hook on the bench edge, and heavy planing forces can push it out of place. A bench vise or holdfasts suit heavy planing better.

Woodworkers with a well-equipped shop may already own the parts to build a better hook than anything sold ready-made. Three pieces of hardwood offcut, cut square and screwed together, will outlast a bought hook and fit the bench exactly.

FAQ

What are the three parts of a bench hook?

A bench hook has a bed, a fence and a hook. The bed is the flat board that the workpiece sits on. The fence, also called the stop, is a strip fixed across the top of the bed at one end, and the workpiece is pushed against it. The hook is a strip fixed underneath the bed at the opposite end, and it catches the edge of the workbench.

Can I use a bench hook as a shooting board?

Yes, when the stop runs across the full width of the bed. Flip the hook over so the fence hooks over the benchtop, then run a hand plane along the bench with the workpiece held against the stop. The plane trims the end grain square.

How do I make a bench hook myself?

Cut a bed from plywood or hardwood about 300 mm long and 200 mm wide, then cut two strips for the fence and the hook. Screw and glue the fence across the top at one end and the hook underneath at the other end, keeping both square to the bed. Check squareness before the glue dries.

Why does my bench hook slide across the bench?

A hook slides when the under-hook does not catch the bench edge firmly, or when the bed is too light for the force of the cut. Check that the hook strip is thick enough to grip the bench edge and that the bed sits flat. A non-slip mat under the bed helps.

Final verdict

The ESSDEE BH1 is the best ready-made bench hook for carvers and small saw cuts, because it follows the classic wooden design at a size that suits detail work. The Ubamdom 4-pack suits metal plate work and shared studios, and the three Speedball kits are the best route to a bench hook for printmakers. For woodworkers who saw daily, the best bench hook is still the one built from scrap in half an hour, sized to the bench. Choose the route that fits your work and keep the stop square.

C
Carpenter's Equip Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
How to Choose a Bench Hook for Workbenches…Check price on Amazon

Related guides

Browse all Uncategorized guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.