Updated Nov 20, 2026· 9 min read

Key takeaways

  • Compare five hand planes for smoothing, jointing, and trimming, from a budget No. 4 bench plane to a low-angle jack and a Japanese pull plane.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

The best hand plane for most woodworkers is the Stanley No. 4 Adjustable Bench Plane, model 12-404. It is the standard smoothing size at about 9-3/4 inches long with a 2-inch cutter, it costs less than the premium bench planes and handles the job most buyers actually need: taking thin, even shavings off a board face until the surface is flat and ready for finish. If you buy one plane first, buy a No. 4.

The five planes below cover the full bench-plane set rather than one size repeated five times: a smoothing plane, a jack plane for flattening and removing mill marks, a low-angle jack for end grain, a low-angle block plane for one-handed trimming, and a Japanese pull plane for fine smoothing. Each one is sold on Amazon, and each one needs the same setup work before it cuts well: flatten the sole, flatten the back of the iron, and sharpen the edge.

As an Amazon Associate, we earn from qualifying purchases.

Sections
  1. Table of Contents
  2. Stanley No. 4 Adjustable Bench Plane (12-404)
  3. Stanley No. 5 Jack Plane
  4. Stanley No. 62 Low Angle Jack Plane (12-137)
  5. Stanley Sweetheart No. 60-1/2 Low Angle Block Plane (12-139)
  6. KAKURI Japanese Large Hand Plane 60mm
  7. How to Choose a Hand Plane
  8. Frequently Asked Questions
  9. Conclusion

Table of Contents

Stanley No. 4 Adjustable Bench Plane (12-404)

Stanley No. 4 Adjustable Bench Plane (12-404)

Stanley No. 4 Adjustable Bench Plane (12-404)

Check price on Amazon

The No. 4 is the smoothing plane, and the Stanley 12-404 is the budget pick that defines the size. At about 9-3/4 inches long with a 2-inch cutter, it is short enough to follow a board face closely and long enough to bridge small hollows. The cast iron body, adjustable frog, and depth and lateral adjusters follow the Bailey pattern that has worked for more than a century, and at about 2.8 pounds it is light enough for long sessions.

This is the plane to buy if you own no bench plane at all. It takes the final shavings after a jack plane or a thickness planer has done the heavy work, and it often leaves a surface that needs no sanding. Budget an evening for setup: new planes in this class commonly arrive with a sole that is not perfectly flat and an iron that needs its back flattened. Once tuned, it cuts as cleanly as planes costing several times as much.

Spec Detail
Type No. 4 smoothing bench plane
Model 12-404
Length About 9-3/4 inches
Cutter width 2 inches
Body Cast iron
Weight About 2.8 pounds
Adjustment Depth and lateral adjusters, adjustable frog
ASIN B000FK3WI2

Stanley No. 5 Jack Plane

The No. 5 is the jack of all trades, and the name is literal: at 14 inches long with a 2-inch cutter, it is long enough to flatten a board face and short enough to smooth one. It removes mill marks, levels glue joints, and takes down high spots before the smoothing plane finishes. The cast iron body carries a rosewood-style tote and knob, and at about 4-3/4 pounds the extra mass keeps the sole registered through a cut.

Buy the No. 5 second, after the No. 4, or first if boards arrive rough. Rough-sawn lumber, reclaimed boards, and glued-up panels all need a jack plane before a smoothing plane can do its job. The same setup warning applies: flatten the sole, flatten the iron back, sharpen, and set a light cut. A slightly cambered iron removes material quickly without deep tracks, and a straight iron with eased corners finishes edges cleanly.

Spec Detail
Type No. 5 jack bench plane
Length 14 inches
Cutter width 2 inches
Body Cast iron
Handles Rosewood-style tote and knob
Weight About 4-3/4 pounds
Adjustment Depth and lateral adjusters
ASIN B0001IWDDI

Stanley No. 62 Low Angle Jack Plane (12-137)

The No. 62 is the low-angle jack, and the most versatile plane here. The blade sits bevel-up on a 12-degree bed, giving a low effective cutting angle that slices end grain cleanly instead of crushing it. That makes it the right tool for trimming end grain, shooting miters on a shooting board, and smoothing figured wood where a standard 45-degree plane would tear out. At 14 inches long with a 2-inch cutter, it covers the same ground as the No. 5.

This is the Sweetheart premium version, model 12-137. The ductile iron body has the frog cast as one piece with the body, which keeps blade support rigid and reduces chatter. The A2 tool steel blade is 2 inches wide with a 25-degree bevel, the Norris-style adjuster combines depth and lateral adjustment in one control, and the tote and knob are American cherry. The adjustable throat plate sets the mouth for fine or heavy cuts. At about 6 pounds it is the heaviest plane here, and that weight steadies end-grain cuts. Spare blades for this model are harder to find than standard bench-plane irons, so plan on keeping the original blade sharp.

Spec Detail
Type No. 62 low-angle jack plane
Length 14 inches
Cutter width 2 inches
Blade A2 tool steel, 25-degree bevel, bevel-up
Body Ductile iron, one-piece frog
Weight About 6 pounds
Adjustment Norris-style adjuster, adjustable throat plate
ASIN B005GVCFOW

Stanley Sweetheart No. 60-1/2 Low Angle Block Plane (12-139)

The block plane is the tool you reach for most often, and the Stanley Sweetheart 60-1/2 is the premium version of the classic design. At 6-1/2 inches long and 2-1/8 inches wide, it fits in one hand and trims end grain, chamfers edges, and fits joints without a trip back to the bench. The low-angle bed and bevel-up blade make it the best small plane for end grain, where most trimming happens.

Model 12-139 is ductile iron with the frog cast as one piece with the body, and the blade is A2 tool steel, 1-3/4 inches wide and 1/8 inch thick, ground to a 25-degree bevel. The adjustable mouth closes down for whisper-thin shavings or opens for heavier chamfering cuts. At 2 pounds it is heavy for a block plane, and that weight steadies the cut on cross grain. Check the mouth on arrival: published testing found a large gap at the throat even with the mouth closed fully, which lets thin shavings jam. If the mouth does not close evenly, exchange the plane rather than fighting it.

Spec Detail
Type No. 60-1/2 low-angle block plane
Length 6-1/2 inches
Width 2-1/8 inches
Blade A2 tool steel, 1-3/4 inches wide, 1/8 inch thick, 25-degree bevel
Body Ductile iron, one-piece frog
Weight 2 pounds
Adjustment Adjustable mouth, pivoting lock lever
ASIN B002B56CVI

KAKURI Japanese Large Hand Plane 60mm

The KAKURI is the odd one out here, and that is the point. It is a Japanese kanna: a white oak body with a laminated high-carbon steel blade and no adjusters, frog, or cast iron. You pull it toward you instead of pushing it away, and you adjust the cut by tapping the blade with a small hammer. For fine smoothing, the pull stroke gives remarkable control, because your body weight stays behind the cut.

The 60mm is the large smoothing kanna in the KAKURI line. The body is about 10.1 inches long and 2.9 inches wide, the blade measures 50mm wide, and the tool weighs about 2.2 pounds. The blade is SK85 laminated steel with a soft-iron backing, and a chipbreaker ahead of the cutting edge controls tear-out. Match the exact listing when you order: KAKURI sells 42mm and 50mm sizes under different model numbers, and the size name refers to the body class rather than the blade, since the 60mm plane carries a 50mm blade. The part number for the 60mm model is 41937.

Spec Detail
Type Japanese kanna smoothing plane
Length About 10.1 inches
Width About 2.9 inches
Blade width 50mm
Blade SK85 laminated high-carbon steel with chipbreaker
Body White oak, oil finish
Weight About 2.2 pounds
Adjustment Hammer-tapped blade, pull stroke
ASIN B002TYZQ22

How to Choose a Hand Plane

Start with the job, not the brand. A smoothing plane finishes a surface, a jack plane flattens it, a block plane trims it, and a low-angle plane handles end grain. Most woodworkers need a smoothing plane first, a jack second, and a block plane third. The low-angle jack and the Japanese kanna are specialist upgrades for later.

Bed angle decides what the plane does well. Standard bench planes bed the blade at 45 degrees with the bevel down, which suits face grain. Low-angle planes bed the blade at 12 degrees with the bevel up, giving a lower effective cutting angle for end grain and figured wood. A steeper bevel on a bevel-up blade raises the effective angle for reversing grain.

Blade steel and sole flatness matter more than marketing. A thick blade resists chatter, A2 steel holds an edge longer than plain carbon steel, and laminated Japanese blades combine a hard edge with a soft backing. Check the sole with a straightedge on arrival and lap it on abrasive paper over a flat surface if light shows underneath.

Two honest limits: Lie-Nielsen and Veritas build excellent planes but sell mainly through their own stores and specialty retailers rather than Amazon, so they are not among these five picks. And the old Stanley 12-220 block plane is discontinued, so buyers looking for it should match the 60-1/2 or the contractor-grade 12-960 instead and confirm the model number on the listing.

Buy one plane and learn to sharpen it. A sharp No. 4 in practiced hands outperforms a dull premium plane every time.

Frequently Asked Questions

Which hand plane should a beginner buy first?

A No. 4 smoothing plane, such as the Stanley 12-404 here. It is the standard size for finishing board faces, and it teaches sharpening, sole flattening, and depth setting. Add a No. 5 jack next if boards arrive rough, and a block plane third for trimming.

Do new hand planes work straight out of the box?

Rarely. Most new planes need the sole checked for flatness, the back of the iron flattened, and the edge honed before they cut cleanly. Treat setup as part of buying the tool, not as a defect.

What is the difference between a low-angle plane and a standard plane?

A low-angle plane beds the blade bevel-up at about 12 degrees, giving a low effective cutting angle that slices end grain cleanly. A standard bench plane beds the blade bevel-down at 45 degrees, which suits face grain. Low-angle planes also let you change the effective angle by regrinding the bevel.

Can a hand plane replace sanding?

Often, yes, for the final surface. A sharp smoothing plane leaves a clean, flat surface with shavings instead of dust, and many woodworkers finish directly after planing. Rough work still needs a jack plane or thickness planer first, and curved surfaces still need abrasives or scrapers.

Conclusion

The right first buy matches the work in front of you. The Stanley 12-404 covers smoothing at a budget tier, the No. 5 covers flattening, the No. 62 covers end grain and shooting, the 60-1/2 covers one-handed trimming, and the KAKURI covers fine pull-stroke smoothing. Buy the size your work needs, sharpen it properly, check the sole, and let the shavings tell you when the setup is right.

C
Carpenter's Equip Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Hand Planes for Woodworking, Smoothing and TrimCheck price on Amazon

Related guides

Browse all Buying Guides guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.