Updated Nov 20, 2026· 9 min read

Key takeaways

  • Compare five sawhorse brackets for 2x4 lumber, from heavy-duty steel to resin and galvanized sets, and match capacity and fastening to your build.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

⭐ Key Takeaways
Quick answer: Our top pick is BORA Jobhorse PM-3310 (Premium), with BORA Jobhorse PM-3310 Sawhorse Brackets as a strong alternative.

The best sawhorse brackets for most woodworkers are the BORA Jobhorse PM-3310 brackets: heavy-gauge steel, a 1,000-pound rating per sawhorse, clamping teeth that bite into standard 2×4 or 2×6 lumber, and foot-activated locks that set up in under a minute. For custom-length horses, the 2x4basics 90196MI resin brackets build sawhorses in 3, 4, or 5 foot lengths. The Century 72994 and Gisafai sets cover light work on a budget, while the POWERTEC 71026V accepts top boards up to 2×12.

A sawhorse bracket is not a sawhorse. It is the hardware that turns ordinary 2×4 lumber into one: two brackets form one horse, four form a pair, and the lumber supplies the legs and the top rail. The bracket decides the load rating, the leg angle, and how the horse comes apart for storage, while the lumber decides the length and height. The five sets below cover steel, structural resin, and plastic builds, so the right pick depends on what the horse will hold and how often it will be built and broken down.

As an Amazon Associate, we earn from qualifying purchases.

Sections
  1. Table of Contents
  2. How to Choose Sawhorse Brackets
  3. BORA Jobhorse PM-3310 (Premium)
  4. 2x4basics 90196MI Custom Pro Brackets (Mid-range)
  5. POWERTEC 71026V Sawhorse Brackets (Mid-range)
  6. Century Drill and Tool 72994 Sawhorse Brackets (Budget)
  7. Gisafai Steel Saw Horse Brackets (Budget)
  8. Who Should Skip Sawhorse Brackets
  9. Frequently Asked Questions
  10. Conclusion

Table of Contents

How to Choose Sawhorse Brackets

Start with capacity, and read the fine print before comparing numbers: some makers rate one sawhorse, others rate a pair. A horse rated at 1,000 pounds handles sheet goods and hardwood, while a light-duty set rated near 220 pounds per pair suits painting and trim. If the rating is missing, treat the capacity as unknown.

Material comes next. Steel brackets carry the highest loads and survive drops, but they add weight and need a rust-resistant finish. Heavy-gauge structural resin weighs less, never rusts, and still carries serious loads. Plain plastic brackets are the lightest and cheapest, but they belong on light jobs only.

Fastening decides how the horse goes together. Nail-hole brackets assemble with nails or screws and break down by pulling them, which wears the lumber ends over repeated builds. Clamping-tooth brackets bite into the lumber without fasteners and release with a foot lever, keeping the lumber reusable. Bolt-and-knob brackets lock the top board through a center hole.

Check the lumber size the brackets accept. Most sets take standard 2×4 lumber for legs and the top rail. Some also accept 2×6 top boards, and one set here accepts top boards up to 2×12. Finally, count the brackets: two build one sawhorse and four build a pair.

BORA Jobhorse PM-3310 (Premium)

The BORA Jobhorse PM-3310 is the strongest all-around pick in this roundup. Two heavy-gauge steel brackets build one sawhorse from standard 2×4 or 2×6 lumber, with a rated capacity of 1,000 pounds per horse. Clamping teeth bite into the lumber so the brackets lock on without nails or screws, and foot-activated locks release them just as fast, so a horse goes up in under a minute.

The quick-lock design earns the premium slot. Nail-hole brackets need fasteners at every joint and wear the lumber ends with each rebuild, while the PM-3310 clamps bite and release, so the same 2×4 legs can be reused across many builds. The fixed leg splay keeps the horse stable on uneven ground.

Check the pack count before ordering: this listing is a 2-pack that builds one sawhorse, so a pair of horses needs two packs.

Specs Details
Brand BORA
Model PM-3310
Material Heavy-gauge steel, powder-coated
Capacity 1,000 lb per sawhorse
Quantity 2 brackets (builds 1 sawhorse)
Lumber Standard 2×4 or 2×6
Fastening Clamping teeth, foot-activated locks
Weight 12.72 lb per pair
ASIN B0DM6GNLKL
2x4basics 90196MI Custom Pro Brackets Sawhorse

2x4basics 90196MI Custom Pro Brackets Sawhorse

Check price on Amazon

BORA Jobhorse PM-3310 Sawhorse Brackets

BORA Jobhorse PM-3310 Sawhorse Brackets

Check price on Amazon

2x4basics 90196MI Custom Pro Brackets (Mid-range)

The 2x4basics 90196MI brackets are the pick for builders who want custom-length sawhorses. Molded from heavy-gauge structural resin, the kit builds sawhorses in 3, 4, or 5 foot lengths from the builder’s own lumber, with all hardware included. The kit includes four brackets and eight stabilizing feet to make two sawhorses.

Resin is the trade-off here. It weighs far less than steel, never rusts, and the kit weighs 8.38 pounds, so two horses worth of brackets carry easily in a tool bag. The published capacity figure is stated for a pair of horses at up to 2,000 pounds, a paired rating rather than a per-horse rating, so compare it with the per-horse figures here with that difference in mind. Resin flexes slightly under load where steel does not.

One caution: a recent crawl of this ASIN showed the listing as currently unavailable, and availability has varied, so confirm a live offer before ordering. If it is unavailable, the steel BORA set above is the closest substitute.

Specs Details
Brand 2x4basics
Model 90196MI
Material Heavy-gauge structural resin
Capacity Up to 2,000 lb per pair of horses
Quantity 2-pack; 4 brackets and 8 stabilizing feet (makes 2 sawhorses)
Lumber Standard 2×4
Lengths 3, 4, or 5 ft
Assembly Screwdriver only, hardware included
Weight 8.38 lb
ASIN B0030T1BRY

POWERTEC 71026V Sawhorse Brackets (Mid-range)

The POWERTEC 71026V brackets suit builders who want a wide top board. The set of two plastic brackets builds one sawhorse, and the top board can be a 2×4, 2×6, 2×8, 2×10, or 2×12, while the legs are cut from 2×4 lumber. That range turns two horses into a wide workbench top, rated at 500 pounds for cutting, sanding, and assembly.

The fastening method is the distinctive part of this design. A bolt passes through the top board into the center hole of the bracket and locks with a knob. The instruction sheet includes a chart for cutting legs to the desired height, and that chart applies to a 2×4 top board, so legs need to be cut slightly shorter when a wider top board is used.

Plastic is the limit here. These brackets are molded plastic rather than steel or structural resin, so they belong on mid-range work, not heavy timber or full sheets of hardwood. The set includes two brackets, so a pair of horses needs two sets.

Specs Details
Brand POWERTEC
Model 71026V
Material Plastic
Capacity 500 lb
Quantity Set of 2 (builds 1 sawhorse)
Top board 2×4, 2×6, 2×8, 2×10, or 2×12
Legs 2×4 lumber
Fastening Bolt through top board, knob lock
UPC 843441113416
ASIN ⚠ B09SYNX2TP

Century Drill and Tool 72994 Sawhorse Brackets (Budget)

The Century Drill and Tool 72994 brackets are the budget pick for builders who want galvanized steel at a low cost. The set includes four brackets, enough to build two sawhorses from standard 2×4 lumber, and the galvanized finish resists rust in a damp garage or outdoors.

The main gap in this listing is the missing capacity figure. No published load rating surfaced for the 72994, so use this set on light to mid-range work only: painting, trim, cutting boards to length, and assembly of small projects. Do not load these horses with full sheets of hardwood or heavy beams until the maker publishes a rating.

The set of four is the practical advantage here. Most brackets in this roundup sell as a pair that builds one horse, which means two purchases for a working pair, while this set builds two horses in one box.

Specs Details
Brand Century Drill and Tool
Model 72994-FBA
Material Galvanized steel
Capacity Not published
Quantity Set of 4 (builds 2 sawhorses)
Lumber Standard 2×4
Fastening Nail holes
UPC 081838729943
ASIN ⚠ B0CRSQCY6Q

Gisafai Steel Saw Horse Brackets (Budget)

Gisafai Steel Saw Horse Brackets

Gisafai Steel Saw Horse Brackets

Check price on Amazon

The Gisafai steel brackets are the lightest-duty set in this roundup and the right pick for the smallest jobs. Four galvanized carbon steel brackets build a pair of sawhorses from standard 2×4 lumber, rated at 220 pounds, or 100 kilograms, per pair. That rating suits painting, light cutting, and holding one board at a time.

Each bracket measures about 5.71 by 3.74 by 3.54 inches, and the set stores flat in a small box when the lumber comes off. The galvanized surface resists rust in a garage or a shed.

Two points deserve a plain statement. First, the brand is a generic import brand rather than an established tool maker, so long-term support and consistent quality are less certain than with the named brands here. Second, the 220-pound rating is the ceiling for the pair, not a comfortable working load, so stay well under that figure and sit the horse on a flat floor.

Specs Details
Brand Gisafai
Material Carbon steel, galvanized surface
Capacity 220 lb (100 kg) per pair
Quantity 4 pieces (builds 2 sawhorses)
Lumber Standard 2×4 (3.8 x 8.9 cm)
Dimensions Approx. 5.71 x 3.74 x 3.54 in per bracket
ASIN B0D1Q4KYDY

Who Should Skip Sawhorse Brackets

Sawhorse brackets are not the right buy for every shop. If the work needs horses that fold flat and deploy in seconds, a complete folding sawhorse is faster than any bracket set, because brackets still need lumber cut and fastened between jobs. Finally, anyone who needs a rated capacity above 1,000 pounds per horse should look at complete heavy-duty sawhorses instead, since the lumber itself becomes the weak point past that level.

Frequently Asked Questions

How many brackets do I need to build a sawhorse?

Two brackets build one sawhorse, and four brackets build a pair. Most jobs need a pair to support both ends of a board, so count on four brackets for cutting sheet goods or long lumber. Check the listing, because some sets sell two brackets and others sell four.

What lumber do sawhorse brackets use?

Most brackets use standard 2×4 lumber for the legs and the top rail. Some sets also accept 2×6 lumber for the top rail, and the POWERTEC set accepts top boards up to 2×12. Cut the legs to the length the bracket design needs, since the bracket sets the leg angle.

Are steel brackets better than resin brackets?

Steel brackets carry higher loads and survive drops, while resin brackets weigh less, never rust, and still carry serious loads. Steel suits heavy cutting, resin suits a builder who carries the kit. Plastic brackets belong on light work only.

Do sawhorse brackets need screws or nails?

It depends on the design. Nail-hole brackets need nails or screws at each joint. Clamping-tooth brackets like the BORA PM-3310 bite into the lumber without fasteners. Bolt-and-knob brackets like the POWERTEC 71026V lock the top board through a center hole.

Conclusion

The BORA Jobhorse PM-3310 is the best sawhorse bracket for most woodworkers: heavy-gauge steel, a 1,000-pound rating, and tool-free clamping teeth cover the widest range of shop work. The 2x4basics 90196MI resin kit is the pick for custom-length horses, with 3, 4, and 5 foot builds from one kit, though buyers should confirm a live offer. The POWERTEC 71026V suits builders who want a wide top board up to 2×12, the Century Drill and Tool 72994 set is the budget way to build two galvanized steel horses, and the Gisafai set covers light work at the lowest cost. Match the bracket to the load and count the brackets per horse.

C
Carpenter's Equip Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Sawhorse Brackets: 5 Picks for 2×4 DIY…Check price on Amazon

Related guides

Browse all Buying Guides guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.