Updated Nov 19, 2026· 8 min read

Key takeaways

  • Learn how to choose a drill press for woodworking, from swing and spindle travel to speed ranges, chucks, and tables that keep holes accurate.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

A drill press does one job a handheld drill cannot: it drives a bit straight down, at a set depth, in the same spot, hole after hole. That repeatability is what makes it essential for dowel joints, mortises, shelf pin holes, and hardware installation. The bit stays square to the table, the depth stop controls how far it goes, and the operator controls the feed with a lever instead of body weight.

Choosing a drill press means matching the machine to the work. Swing decides the largest panel that fits under the chuck. Spindle travel decides the deepest hole in one pass. Speed range decides whether the press can drill a large Forstner bit slowly and a small twist bit quickly.

As an Amazon Associate, we earn from qualifying purchases.

Sections
  1. Quick Answer
  2. 1. WEN 4214T 12-Inch Variable Speed Drill Press
  3. 2. WEN 4212T 10-Inch Variable Speed Drill Press
  4. 3. Delta 18-900L 18-Inch Laser Drill Press
  5. 4. JET JDP-17 17-Inch Floor Drill Press
  6. 5. SKIL DP9505-00 10-Inch Benchtop Drill Press
  7. How to Choose a Drill Press for Woodworking
  8. Who Should Skip These Drill Presses
  9. Frequently Asked Questions
  10. Final Verdict

Quick Answer

For most woodworking shops, a 12 inch benchtop drill press with variable speed, a 5/8 inch chuck, and at least 3 inches of spindle travel is the best fit. It drills dowel, Forstner, and shelf pin holes in panels up to a foot wide, and it fits on a bench. Compact 10 inch presses suit small work, while 17 and 18 inch floor presses suit furniture makers.

1. WEN 4214T 12-Inch Variable Speed Drill Press

Check price on Amazon

The WEN 4214T is the benchtop press that covers the most woodworking jobs in one machine. A 12 inch swing centers holes in panels up to a foot wide, and the 5 amp motor drives a mechanical variable speed control from 580 to 3,200 RPM, so the operator dials the exact speed for each bit without stopping to move a belt.

Spindle travel of 3 and an eighth inches drills deep mortises and thick stock in one pass, which is more than most benchtop presses offer. The table measures 9 and a half inches square, bevels 45 degrees in either direction, and includes a roller extension that supports long boards while drilling. A laser crosshair marks the entry point, and a work light shines on the cut.

This press suits a home shop that drills a mix of dowel holes, Forstner holes, and mortises in furniture parts.

Specs: 12 inch swing; 5 amp motor; variable speed 580 to 3,200 RPM; 3 and an eighth inch spindle travel; 5/8 inch keyed chuck; laser crosshair; work light; digital speed readout; roller table extension; 85 pounds; 2 year warranty.

2. WEN 4212T 10-Inch Variable Speed Drill Press

Check price on Amazon

The WEN 4212T is the smaller sibling of the 4214T, and it fits shops where bench space is tight and the work stays small. A 10 inch swing centers holes in panels up to ten inches wide, which covers drawer parts, small boxes, and hardware installation. The 5 amp motor runs the same mechanical variable speed system, from 530 to 3,100 RPM, with a digital readout and a laser guide.

Spindle travel of 2 inches handles most dowel and Forstner holes in stock up to two inches thick, which is enough for the majority of home shop work. The laser and digital readout carry over from the larger model, so accuracy does not suffer with the smaller size.

Choose this press when the work is small and the bench is crowded. It drills clean, accurate holes in furniture parts and small projects, and it costs less than the 12 inch model while keeping variable speed.

Specs: 10 inch swing; 5 amp motor; variable speed 530 to 3,100 RPM; 2 inch spindle travel; 5/8 inch keyed chuck; laser guide; digital speed readout; cast iron table; 57 pounds.

3. Delta 18-900L 18-Inch Laser Drill Press

The Delta 18-900L is the floor press for furniture makers who drill large panels and deep holes. An 18 inch swing centers holes in panels a foot and a half wide, and 6 inches of quill travel drills the deepest mortises and through holes in one pass. Sixteen speeds from 170 to 3,000 RPM cover everything from large Forstner bits turning slowly to small twist bits running fast.

Twin lasers project a crosshair on the work surface, and the oversized table tilts 90 degrees in either direction for angled drilling. The 3/4 horsepower motor drives the machine through dense hardwood without bogging down, and the 5 year warranty backs a machine built to last decades.

This press suits a shop that builds furniture, cabinets, and large panels, and that drills deep holes regularly.

Specs: 18 inch swing; 3/4 horsepower motor; 16 speeds 170 to 3,000 RPM; 6 inch quill travel; 5/8 inch chuck; twin laser guides; micro adjustable depth stop; table tilts 90 degrees left and right; 5 year warranty.

4. JET JDP-17 17-Inch Floor Drill Press

Check price on Amazon

The JET JDP-17 is the floor press for shops that want maximum reach and stability without stepping up to an industrial machine. A 16 and 7 eighths inch swing centers holes in wide panels, and 5 inches of spindle travel drills deep holes in a single plunge. Sixteen speeds from 210 to 3,500 RPM cover the full range of woodworking bits, from large Forstner bits to small brad point bits.

A 14 by 19 inch work table gives large panels solid support, and the table tilts 90 degrees for angled work.

Choose the JDP-17 when the shop drills large furniture parts and deep holes every week. It is the most capable floor press in this guide for the size, and it handles the work that sends a benchtop press to its limits.

Specs: 16 and 7 eighths inch swing; 3/4 horsepower motor; 16 speeds 210 to 3,500 RPM; 5 inch spindle travel; 5/8 inch chuck; 14 by 19 inch table; LED work light; poly V belt drive; 187 pounds; 5 year warranty.

5. SKIL DP9505-00 10-Inch Benchtop Drill Press

Check price on Amazon

The SKIL DP9505-00 is the entry level press for a first shop. A 10 inch swing and a 6.2 amp induction motor cover dowel holes, shelf pin holes, and hardware installation in small furniture parts. Five speeds from 610 to 2,800 RPM change by moving the belt on stepped pulleys, which takes a minute and teaches the operator which speed suits each bit.

A laser alignment system marks the hole location, and an LED work light illuminates the table. The depth stop controls hole depth for repeat work, and the table tilts 0 to 45 degrees in either direction for angled holes.

This press suits beginners and woodworkers setting up a first bench. It drills accurate holes in small work, and the laser and light make setup forgiving.

Specs: 10 inch swing; 6.2 amp induction motor; 5 speeds 610 to 2,800 RPM; laser alignment system; LED work light; adjustable depth stop; table tilts 0 to 45 degrees; bump off switch; 3 year warranty.

How to Choose a Drill Press for Woodworking

Swing is the first measurement to check. It is twice the distance from the chuck center to the column, and it decides the widest panel that fits under the bit. A 10 inch swing centers holes in panels up to ten inches wide. A 12 inch swing covers most furniture parts. An 18 inch swing covers cabinet doors and large panels.

Spindle travel, also called quill travel, decides the deepest hole in one pass. Two inches covers dowel holes and shelf pins. Three inches covers most mortises. Five or six inches covers deep mortises and through holes in thick stock.

Speed range matters because different bits need different speeds. Large Forstner bits need slow speeds to avoid burning. Small twist bits need fast speeds for a clean cut. A variable speed press changes speed with a dial, which is convenient for mixed work. A belt speed press changes speed by moving the belt, which costs a minute per change but works just as well once set.

Chuck size decides the largest bit shank the press accepts. A 5/8 inch chuck takes Forstner bits, hole saws, and large twist bits, which is the standard for woodworking. A half inch chuck limits the largest bits, so check the chuck before buying.

Table size and tilt affect how the work sits under the bit. A larger table supports wide panels without tipping. A table that tilts allows angled holes for chairs and joinery.

A depth stop is essential for repeat holes. It limits how far the bit travels, so every hole in a row of shelf pins or dowels comes out the same depth.

Who Should Skip These Drill Presses

Woodworkers who drill only a few holes a month can use a handheld drill with a guide.

Anyone who drills mostly metal needs a press built for metalwork, with slower speeds and a different chuck.

Shops with no bench space for a benchtop press and no floor space for a floor press should sort out the layout first.

Frequently Asked Questions

What size drill press do I need for woodworking?

A 12 inch benchtop press covers most woodworking, from dowel holes to Forstner holes in furniture parts. A 10 inch press suits small work and tight benches. An 18 inch floor press suits furniture makers who drill wide panels and deep mortises.

Is variable speed worth it on a drill press?

Variable speed is convenient when the work mixes large Forstner bits and small twist bits, since the operator changes speed with a dial instead of moving a belt. Belt speed presses cost less and work well when the speed stays set for a long run. For mixed daily work, variable speed saves time and encourages using the right speed for each bit.

What speed should I drill wood at?

Large bits need slow speeds and small bits need fast speeds. A 2 inch Forstner bit runs best at a few hundred RPM, while a quarter inch twist bit runs well above 2,000 RPM. Dense hardwood needs slower speeds than softwood for the same bit.

Do I need a drill press vise?

A vise holds small parts securely and keeps fingers away from the bit, which makes it a worthwhile accessory for small work. Large panels usually clamp directly to the table. A vise is not required to use a drill press, but it improves safety and accuracy on small pieces.

Final Verdict

For most woodworking shops, the WEN 4214T is the best balance of swing, spindle travel, and variable speed, with a 12 inch capacity and 3 and an eighth inches of travel. The WEN 4212T suits smaller work and tighter benches, while the SKIL DP9505-00 is the entry level pick for a first shop. The Delta 18-900L and JET JDP-17 are floor presses for furniture makers who drill wide panels and deep holes every week.

C
Carpenter's Equip Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
How to Choose a Drill Press for Woodworking…Check price on Amazon

Related guides

Browse all Uncategorized guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.