Updated Nov 19, 2026· 9 min read

Our Top Picks

  1. WEN 9-Inch Band Saw59-1/2-inch blades11 x 7 x 4 inches40 Pounds
    Check on Amazon
  2. SKIL 2.8 Amp 9 In. 2-Speed Benchtop BandOne Size1 x 1 x 1 Inches
    Check on Amazon

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

A band saw earns its place in a wood shop by doing two jobs no other saw does well. It resaws wide boards into thin veneer and book matched panels, and it cuts smooth curves that a table saw cannot follow. Throat size decides how wide a board can pass through. Resaw capacity decides how tall a board can stand on edge while the blade slices it into thinner stock. Motor power decides whether the blade keeps moving through dense hardwood or stalls halfway through the cut.

The saws below span the range from compact benchtop models for curves and small stock to a full size floor machine built for serious resawing.

As an Amazon Associate, we earn from qualifying purchases.

Sections
  1. Quick Answer
  2. 1. WEN 3962 Two-Speed Band Saw with Stand
  3. 2. RIKON 10-305 Bandsaw with Fence
  4. 3. WEN BA3959 9-Inch Benchtop Band Saw
  5. 4. SKIL BW9501-00 9-Inch Benchtop Band Saw
  6. 5. JET JWBS-14DXPRO 14-Inch Deluxe Pro Band Saw
  7. How to Choose a Band Saw for Resawing and Curves
  8. Who Should Skip These Band Saws
  9. Frequently Asked Questions
  10. Final Verdict

Quick Answer

For most home shops, a 10 inch benchtop band saw with a 6 inch resaw capacity is the best balance of size, power, and cost. It resaws boards for boxes and veneer, cuts curves in stock a few inches thick, and fits on a bench. Compact 9 inch saws suit curves and small stock, while a 14 inch floor saw suits shops that resaw wide hardwood.

1. WEN 3962 Two-Speed Band Saw with Stand

Check price on Amazon

The WEN 3962 is the benchtop saw that behaves like a bigger machine. A 10 inch throat and a 6 inch resaw capacity cover the boards most home shops slice into veneer or book matched panels, and the two speed drive lets the operator choose between a slower speed for dense hardwood and a faster speed for softwood and curves. The 3.5 amp motor keeps the blade moving through stock that would stall a smaller saw.

A cast iron table supports the work without flexing, and the included stand raises the saw to a comfortable working height while keeping the footprint small. The rip fence and miter gauge come in the box, so resawing and crosscutting work without extra purchases.

The main limit is throat depth: boards wider than ten inches need a larger saw or a different approach.

Specs: 10 inch throat; 6 inch resaw capacity; 3.5 amp motor; two speeds 1,520 and 2,620 FPM; 72 inch blade; cast iron table; stand and work light included; rip fence and miter gauge included.

2. RIKON 10-305 Bandsaw with Fence

Check price on Amazon

The RIKON 10-305 is the compact benchtop saw for shops that value a good fence and a stable table over raw size. A 10 inch throat and a 4 and 5 eighths inch resaw capacity handle curves and resawing in stock up to a few inches thick, which covers boxes, small panels, and curved legs. The included rip fence adjusts smoothly and locks square, which matters when resawing a board into even veneer.

Five belt speeds cover the range from slow cutting in dense hardwood to fast cutting in softwood, and the third horsepower motor keeps the blade moving through typical home shop stock. At a weight that one person can lift onto a bench, the saw moves out of the way when the shop needs the space.

It cuts clean curves, resaws boards for boxes and drawer sides, and costs less than the larger WEN while keeping a proper fence.

Specs: 10 inch throat; 4 and 5 eighths inch resaw capacity; third horsepower motor; 5 speeds; 70 and a half inch blade; cast iron table; rip fence included; tilting table.

3. WEN BA3959 9-Inch Benchtop Band Saw

Check price on Amazon

The WEN BA3959 is the budget saw that opens the door to curved cutting. A 9 inch throat and a 3 and a half inch cutting depth cover scroll style curves, small boxes, and toy parts, which is the work many hobbyists do most often. The 2.8 amp motor spins the blade at 2,500 feet per minute, fast enough for clean cuts in pine, poplar, and soft maple once the saw is tuned.

The saw ships with a rip fence and a miter gauge, and the cast aluminum table bevels up to 45 degrees for angled cuts. At 40 pounds, it lifts on and off the bench with one hand, and the two year warranty covers the machine longer than most saws in this price range.

This saw suits beginners, hobbyists, and shops where the band saw cuts curves in small stock rather than resawing wide boards. It is the cheapest real band saw in this guide, and it earns its place by doing small work well.

Specs: 9 inch throat; 3 and a half inch cutting depth; 2.8 amp motor; 2,500 FPM blade speed; 59 and a half inch blade; cast aluminum table bevels to 45 degrees; rip fence and miter gauge included; 40 pounds; 2 year warranty.

4. SKIL BW9501-00 9-Inch Benchtop Band Saw

Check price on Amazon

The SKIL BW9501-00 shares the 9 inch size class with the WEN BA3959, but it adds two features that change how the saw feels in use. A two speed drive lets the operator slow the blade for dense material or speed it up for softwood, and a quick release tension lever makes blade changes a two minute job instead of a fiddly chore. The 2.8 amp induction motor runs noticeably quieter than the universal motors in many budget saws.

A rack and pinion table adjustment moves the table smoothly for bevel cuts, and a blade tracking sight window lets the operator watch the blade position while the saw runs. Ball bearing blade guides replace the plastic guides found on older budget saws, which keeps the blade tracking true on curves.

Choose the SKIL when the work is mostly curves and small stock, and the operator values quiet running, easy blade changes, and a second speed.

Specs: 9 inch throat; 3 and a half inch cutting depth; 2.8 amp induction motor; two speeds; 59 and a half inch blade; rack and pinion table adjustment; blade tracking sight window; ball bearing blade guides; dust port; miter gauge included; 3 year warranty.

5. JET JWBS-14DXPRO 14-Inch Deluxe Pro Band Saw

Check price on Amazon

The JET JWBS-14DXPRO is the floor saw for shops that resaw wide hardwood every week. A 14 inch throat and a 12 inch resaw capacity slice boards that benchtop saws cannot touch, turning wide planks into book matched panels and thick veneer. The 1 and a quarter horsepower motor drives two belt speeds, and the cast iron frame eliminates the need for a riser block, since the full resaw height is built into the machine.

A 15 by 15 inch cast iron work table supports large boards without tipping, and the table tilts 10 degrees left and 45 degrees right for bevel work. Ball bearing blade guides support the blade above and below the table, which keeps cuts straight through tall stock. The five year warranty reflects the build quality of a machine meant to stay in one place for years.

This saw suits furniture makers, luthiers, and serious hobbyists who resaw wide boards regularly.

Specs: 14 inch throat; 12 inch resaw capacity; 1 and a quarter horsepower motor; two speeds 1,500 and 3,000 SFPM; 105 inch blade; 15 by 15 inch cast iron table; ball bearing blade guides; cast iron frame; 5 year warranty.

How to Choose a Band Saw for Resawing and Curves

Resaw capacity is the number that matters most for resawing. It is the tallest board that can stand on edge under the guide, and it decides whether a wide plank can become two thin panels. Six inches covers boxes, drawer sides, and small veneer. Twelve inches covers furniture panels and wide book matched work. Measure the widest board planned for resawing and choose a capacity at least an inch taller.

Throat size decides how wide a board can pass between the blade and the frame. Nine and ten inch throats suit curves and small stock. Fourteen inch throats suit larger panels and furniture parts.

Motor power decides whether the blade keeps cutting in dense hardwood. Benchtop saws with 2.8 to 3.5 amp motors handle softwood and thin hardwood well, but they slow down in thick maple or oak. A 1 horsepower motor or larger keeps the blade moving through wide resaw cuts without stalling.

Blade selection matters as much as the saw. A wide blade with few teeth per inch cuts straight and fast for resawing. A narrow blade with more teeth per inch follows tight curves. Change blades for the job rather than forcing one blade to do everything.

Guides and fence quality show up in the finished cut. Ball bearing guides support the blade close to the work and reduce drift. A fence that locks square to the table keeps resawn boards even in thickness.

Who Should Skip These Band Saws

Woodworkers who cut only straight lines should buy a table saw instead.

Anyone with no space for a dedicated machine should think twice about a floor saw. A 14 inch band saw weighs around 250 pounds and needs a permanent spot, plus clearance around the table for long boards.

Shops that resaw only occasionally can hire the cut at a lumber yard or use a hand saw for a single board.

Frequently Asked Questions

What size band saw do I need for resawing?

A 10 inch benchtop saw with a 6 inch resaw capacity covers most home shop resawing, including boxes, drawer sides, and small veneer. Shops that resaw wide furniture panels need a 14 inch saw with a 12 inch resaw capacity. Measure the tallest board planned for resawing before choosing.

Why does my band saw blade drift?

Drift usually comes from a dull blade, incorrect tension, or guides set too far from the blade. Replace a dull blade, tension the new blade to the maker’s setting, and set the guides close to the blade above and below the table.

Can a 9 inch band saw resaw boards?

A 9 inch saw with a 3 and a half inch depth can resaw thin boards for boxes and small panels, but it cannot slice wide boards into veneer. For wide resawing, a 10 inch or 14 inch saw is the right tool.

How often should I change the band saw blade?

Change the blade when cuts wander, the saw vibrates, or the blade leaves burn marks and rough surfaces. A blade that has cut a lot of hardwood dulls faster than one used on softwood. Keep a spare blade on hand so a dull blade never forces a bad cut.

Final Verdict

For most home shops, the WEN 3962 is the best balance of resaw capacity, power, and bench friendly size, with a 6 inch resaw height and a stand included. The RIKON 10-305 suits tighter benches and smaller stock, while the WEN BA3959 is the budget pick for curves and hobby work. The SKIL BW9501-00 adds a second speed and quick blade changes for the same size class. The JET JWBS-14DXPRO is the right machine for shops that resaw wide hardwood every week.

C
Carpenter's Equip Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Band Saws for Resawing and Curved Cuts…Check price on Amazon

Related guides

Browse all Uncategorized guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.