Updated Nov 19, 2026· 8 min read

Key takeaways

  • Compare the best sawhorses for woodworking and jobsite support. Load capacity, folding legs, and five pairs that hold steady under heavy boards.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

A sawhorse is the simplest support in the shop, and also the one that gets loaded the hardest. Two horses and a sheet of plywood become a cutting table, an assembly bench, or a finishing station, and the pair has to hold steady while a circular saw runs and a heavy board shifts. The difference between a good pair and a bad one shows up in the details: legs that lock without wobble, a top that accepts a 2×4 crossbar, and a load capacity that matches the lumber you cut. This guide compares five sawhorses that cover the range from heavy steel jobsite pairs to light clamping models for small shops.

As an Amazon Associate, we earn from qualifying purchases.

Sections
  1. Quick Answer
  2. 1. ToughBuilt C700 Folding Sawhorse 2-Pack
  3. 2. BORA Speedhorse PM-4500T Sawhorse Pair
  4. 3. BORA Workhorse PM-3330T Sawhorse Pair
  5. 4. ToughBuilt C550 Sawhorse and Jobsite Table 2-Pack
  6. 5. Worx WX065 Clamping Sawhorses
  7. How to Choose a Sawhorse
  8. Who Should Skip a Sawhorse Upgrade
  9. Frequently Asked Questions
  10. Final Verdict

Quick Answer

For most shops, the ToughBuilt C700 pair is the safest buy: all-steel construction, 1,300 lb capacity per horse, adjustable legs, and support arms that take 2x4s and 4x4s. The BORA Speedhorse is the fastest to set up, while the BORA Workhorse and ToughBuilt C550 cover value and jobsite-table duty. The Worx WX065 suits small shops that need built-in clamps more than raw capacity.

1. ToughBuilt C700 Folding Sawhorse 2-Pack

Check price on Amazon

The ToughBuilt C700 is the heavy-duty pair that other sawhorses get compared against. Each horse is built from high-grade steel with a powder-coated and zinc-plated finish, and each one carries 1,300 lb on its own, or 2,600 lb per pair. The legs adjust for height and fold flat for transport, and pivoting feet settle on uneven ground without rocking. Support arms adjust to hold 2x4s and 4x4s, turning the pair into a stable platform for sheet goods and long boards.

Material support pegs hold planks upright for edge work, and integrated end stops keep boards from sliding off the side during a cut. The C700 also works as a jobsite table: lay a sheet across the pair and the steel frame stays rigid under a miter saw or a stack of plywood. At 23.04 lb each, the weight keeps the pair planted under load.

The C700 costs more than lighter pairs and takes up more room in the truck, but for a shop that cuts heavy lumber and sheet goods every week, it is the pair that holds up.

Specs
– Load capacity: 1,300 lb each, 2,600 lb per pair
– Frame: high-grade steel, powder-coated and zinc-plated
– Support arms: adjustable for 2×4 and 4×4 lumber
– Legs: adjustable height, pivoting feet, fold flat
– Weight: 23.04 lb each
– Includes: material support pegs, end stops
– ASIN: B08B8TVVQX

2. BORA Speedhorse PM-4500T Sawhorse Pair

Check price on Amazon

The BORA Speedhorse is the fastest pair to set up in this guide. A single lever releases the legs and gravity drops them into place, and BORA lists a 1.6-second setup time. On a jobsite where the horses go up and down ten times a day, that speed is the feature you feel. The pair is rated to 1,800 lb, and the pre-drilled metal top takes a 2×4 as a wider crossbar for sheet goods.

Each horse weighs 17.19 lb, light enough to carry one in each hand, and the working height is 30 inches, a comfortable height for cutting with a circular saw. The legs fold without a set sequence, and the pair stacks flat for transport. The Speedhorse suits crews and DIYers who set up and tear down constantly.

The Speedhorse holds less than the ToughBuilt C700, and the lever mechanism needs to seat fully before loading the top. For cutting plywood and framing lumber, the capacity is more than enough.

Specs
– Load capacity: 1,800 lb
– Setup: lever-release legs, 1.6-second setup
– Working height: 30 inches
– Top: metal, pre-drilled for 2×4 crossbar
– Weight: 17.19 lb each
– ASIN: B07RTM6BYZ

3. BORA Workhorse PM-3330T Sawhorse Pair

Check price on Amazon

The BORA Workhorse PM-3330T is the value pick for a shop that wants a steel pair without paying for the fastest setup or the highest capacity. Two horses arrive fully assembled, fold up for storage, and carry 1,000 lb per pair, or 500 lb each. The top measures 39 inches long by 3.5 inches wide, with a 33-inch working height and a wide, stable stance.

The Workhorse suits sheet goods and general cutting work. Pre-drilled holes let you bolt a 2×4 or a 2×6 across the pair for a wider platform under a full sheet of plywood, which is the trick that makes a modest pair handle big panels. The pair weighs 15.5 lb in total, and the one-year limited warranty covers the frame.

The 33-inch height is not adjustable, and the narrow top needs a 2×4 crossbar to support sheet goods comfortably. For a home shop and light jobsite work, the Workhorse is a fair buy that does the core job well.

Specs
– Load capacity: 1,000 lb per pair, 500 lb each
– Working height: 33 inches
– Top: 39 x 3.5 inches, pre-drilled for 2×4 or 2×6 crossbar
– Weight: 15.5 lb per pair
– Arrives: fully assembled
– ASIN: B0D1GMK1JC

4. ToughBuilt C550 Sawhorse and Jobsite Table 2-Pack

Check price on Amazon

The ToughBuilt C550 is the jobsite-table member of the ToughBuilt line, and it earns its place with adjustable 2×4 support arms. Two horses combine for a 2,200 lb capacity, and the arms let you set a 2×4 across the pair as a sacrificial cutting surface or a wider work platform. The all-steel frame is powder-coated and zinc-plated, and the pair folds flat for transport.

The C550 carries a 41.5-inch easy-carry handle, making the pair simpler to move than the heavier C700, and the support arms adjust to hold different lumber sizes. The horses work as a standalone pair for cutting and as a jobsite table when a sheet goes across the top, covering both roles in a small shop without a dedicated workbench.

The C550 holds less than the C700 and lacks the pivoting feet and adjustable legs of its bigger sibling, so uneven ground needs shims. For a shop that wants the jobsite-table function at a lower outlay than the C700, it is the right compromise.

Specs
– Load capacity: 2,200 lb per pair
– Frame: all-steel, powder-coated and zinc-plated
– Support arms: adjustable 2×4 arms
– Handle: 41.5-inch easy-carry handle
– Folds: flat for transport
– ASIN: B0888RJG9K

5. Worx WX065 Clamping Sawhorses

Check price on Amazon

The Worx WX065 is the pair for small shops that need clamping more than raw capacity. Two sawhorses come with two removable bar clamps that grip material up to 18 inches wide, horizontally or vertically, so a board stays put while you cut, sand, or glue it. The pair is rated to 1,000 lb, and the built-in shelf and cord hooks keep tools off the floor.

The WX065 folds to about 2.5 inches thick for wall or shelf storage, and the pair weighs 15.6 lb, light enough to carry one-handed. The working height is 32 inches, matching the Worx Pegasus work table, so the two can work together on the same project. The clamps attach without tools and work away from the horses as standalone bar clamps.

Fixed-height legs mean no leveling on uneven ground, and the clamps are rated for a modest 300 lb of clamping force rather than heavy glue-up duty. For a small shop focused on cutting and assembly rather than heavy timber, the WX065 is a useful pair.

Specs
– Load capacity: 1,000 lb per pair
– Clamps: 2 bar clamps included, up to 18-inch opening
– Working height: 32 inches
– Folds to: 2.5 inches thick
– Weight: 15.6 lb per pair
– Extras: built-in shelf and cord hooks
– ASIN: B00XPKS6Q2

How to Choose a Sawhorse

Begin with load capacity. Match the pair to the heaviest material you cut: sheet goods and framing lumber suit a 1,000 lb pair, while heavy beams and stacked plywood need 1,800 lb or more. Thirty to 33 inches suits most cutting and assembly, and adjustable legs help on uneven ground or when the work needs a taller surface.

A pre-drilled metal or steel top accepts a 2×4 crossbar, which widens the platform for sheet goods and gives a sacrificial surface for saw cuts. A pair that folds flat and locks together carries easier and stores against a wall. Extras such as support arms, clamps, shelves, and cord hooks add function, but only if you use them. Steel horses hold more and stay steadier, while light pairs carry easier and suit small shops.

Who Should Skip a Sawhorse Upgrade

If you cut one board a month on a workbench, a single folding work table or a pair you already own does the job. Small apartments and tight garages may not have room for a pair that folds to a large flat package, and a compact work table stores smaller.

Jobsite-table pairs and clamping models also make little sense for woodworkers who only cut sheet goods on the floor with a track saw, since the floor itself is the support. Buy a new pair when your current horses wobble, when the load capacity no longer matches the lumber, or when setup speed and a wider top would change how you work.

Frequently Asked Questions

How much weight can a pair of sawhorses hold?

It depends on the model. Light pairs hold 1,000 lb, mid-range steel pairs hold 1,800 to 2,200 lb, and heavy pairs such as the ToughBuilt C700 hold 2,600 lb. Always check the pair capacity rather than the single-horse capacity, and keep the load centered across both horses.

Should I use a 2×4 across my sawhorses?

Yes, for sheet goods. A 2×4 screwed to the pre-drilled top widens the platform and gives a sacrificial surface that the saw blade can cut into without damaging the horse. Remove and replace the 2×4 when it gets chewed up.

Are folding sawhorses stable enough for a circular saw?

Yes, when the legs lock fully and the pair sits on level ground. Check that the legs are locked before loading the top, and keep the cut line between the horses so the offcut falls free.

What is the best sawhorse height for cutting?

Thirty to 33 inches suits most cutting with a circular saw and most assembly work. Taller horses suit sanding and assembly, while shorter supports suit ripping long boards. Adjustable legs let one pair cover more tasks.

Final Verdict

The ToughBuilt C700 is the best sawhorse pair for most woodworkers because it combines the highest capacity in this guide with adjustable legs, support arms, and a steel frame that stays rigid under heavy boards. The BORA Speedhorse suits crews that set up constantly, the BORA Workhorse covers value, the ToughBuilt C550 adds jobsite-table function, and the Worx WX065 suits small shops that need built-in clamps. Match the pair capacity to your lumber, and check that the legs lock fully before loading the top.

C
Carpenter's Equip Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Sawhorses for Woodworking and Jobsite Support 2026Check price on Amazon

Related guides

Browse all Uncategorized guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.