Updated Nov 18, 2026· 10 min read

Key takeaways

  • Compare the best circular saw blades for framing, from fast 24-tooth ripping blades to a 60-tooth finish option, with kerf, arbor, and coating specs.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

The best circular saw blade for framing is a 7-1/4 inch, 24-tooth carbide blade with a thin kerf and a 5/8 inch arbor: it rips and crosscuts dimensional lumber quickly, runs cool in pressure-treated stock, and asks less of the saw than a full-kerf plate. Crews that also cut sheathing and finish material on site round out the kit with a 40-tooth general purpose blade and a 60-tooth finish blade. The five blades below cover that range, from a budget framing blade to a premium ultra finish option, all in the standard 7-1/4 inch size.

As an Amazon Associate, we earn from qualifying purchases.

Sections
  1. Table of Contents
  2. Quick Picks
  3. Diablo D0724X 24-Tooth Framing Blade
  4. Diablo D0740A 40-Tooth Finish Blade
  5. Diablo D0760A 60-Tooth Ultra Finish Blade
  6. Norske Tools NCSBP290 24-Tooth Framing Blade
  7. UXACE 24-Tooth and 60-Tooth 2-Pack
  8. How to Choose a Circular Saw Blade for Framing
  9. FAQ
  10. Conclusion

Table of Contents

  • Quick Picks
  • Diablo D0724X 24-Tooth Framing Blade
  • Diablo D0740A 40-Tooth Finish Blade
  • Diablo D0760A 60-Tooth Ultra Finish Blade
  • Norske Tools NCSBP290 24-Tooth Framing Blade
  • UXACE 24-Tooth and 60-Tooth 2-Pack
  • How to Choose a Circular Saw Blade for Framing
  • FAQ
  • Conclusion
  • Product and ASIN Reference

Quick Picks

  • Best overall: Diablo D0724X 24-Tooth Framing Blade — the classic thin-kerf framing blade, with Tracking Point teeth and specs aimed squarely at framing and pressure-treated lumber.
  • Best budget: Norske Tools NCSBP290 — a Japanese steel, thin-kerf framing blade with a reversible cut design, the value pick of this group.
  • Best premium: Diablo D0760A 60-Tooth Ultra Finish Blade — a 60-tooth ATB blade for the cleanest edges in plywood, trim, and finish material.
  • Best for cleaner crosscuts: Diablo D0740A 40-Tooth Finish Blade — the middle ground when one blade has to rip studs and still leave a presentable edge on sheet goods.
  • Best combo pack: UXACE 24-Tooth and 60-Tooth 2-Pack — one framing blade and one finish blade in a single package.

Diablo D0724X 24-Tooth Framing Blade

The D0724X is the single-blade version of Diablo’s long-running framing design, and it is the reference point for this category. The published specification is a 7-1/4 inch diameter blade with 24 ATB teeth, a 5/8 inch arbor, a thin .059 inch kerf, a 15 degree hook angle, and a .040 inch plate, rated to 8,000 max RPM. That geometry explains its role: the low tooth count and aggressive hook angle clear chips quickly in rips, while the thin kerf removes less material per pass, reducing load on corded and cordless saws alike.

Diablo lists the blade for framing and for cutting pressure-treated wood, 2x lumber, plywood, hardwood, and softwood. The teeth use the maker’s TiCo hi-density carbide, and the Tracking Point tooth design is intended to hold a line and control vibration as the blade works, which helps the blade track straight on long rips through studs and plates. For a crew that wants one proven blade model stocked in every saw case, this is the straightforward choice, and it sits in the mid-range tier of this roundup.

Specs

  • Diameter: 7-1/4 inch
  • Teeth: 24, ATB grind
  • Arbor: 5/8 inch
  • Kerf: .059 inch (thin kerf)
  • Plate: .040 inch
  • Hook angle: 15 degrees
  • Max RPM: 8,000
  • Tooth material: TiCo hi-density carbide
  • Published uses: framing, pressure-treated wood, dimensional lumber, plywood, hardwood, softwood
  • Model: D0724X

Diablo D0740A 40-Tooth Finish Blade

Moving up to 40 teeth trades some ripping speed for a noticeably cleaner edge, and the D0740A is Diablo’s finish blade built around that trade. The published specification is a 7-1/4 inch blade with 40 ATB teeth on a 5/8 inch arbor with a diamond knockout, so it also fits worm drive saws that use the diamond arbor shape. The teeth are TiCo hi-density carbide, and the plate carries the maker’s Perma-Shield non-stick coating, which is published as protection against heat, gumming, and corrosion.

Diablo positions this blade for smooth crosscuts in hardwood, softwood, and plywood, and that is exactly where it fits on a framing site: sheathing, subfloor patches, blocking, and any cut where the edge will show or where splintering would slow down the next step. It still rips framing lumber acceptably for occasional cuts, but its published design intent is finishing work rather than production ripping. In tier terms it is a mid-range blade, and for many carpenters it is the second blade that lives in the saw case next to a 24-tooth blade.

Specs

  • Diameter: 7-1/4 inch
  • Teeth: 40, ATB grind
  • Arbor: 5/8 inch with diamond knockout
  • Tooth material: TiCo hi-density carbide
  • Coating: Perma-Shield non-stick coating
  • Published uses: smooth crosscuts in hardwood, softwood, and plywood
  • Model: D0740A

Diablo D0760A 60-Tooth Ultra Finish Blade

The D0760A is the premium pick in this roundup, built for the cuts where edge quality matters most. Its published specification is a 7-1/4 inch blade with 60 ATB teeth, a 5/8 inch arbor, a .059 inch kerf, a 10 degree hook angle, and a .040 inch plate, rated to 8,000 max RPM. Compared with the framing blade above, the tooth count is two and a half times higher and the hook angle is milder, a combination published for ultra-fine finishing rather than fast material removal.

In practice, that makes this the blade for plywood, melamine-faced panels, trim stock, and finish carpentry cuts made with a circular saw and a guide. The gentler hook angle feeds less aggressively, which helps limit tear-out on veneered sheet goods. It is not the blade to reach for when ripping a stack of studs, since a high tooth count clears chips slowly and builds heat in thick, wet lumber. Used for its published purpose, though, it leaves the edge closest to ready for paint or clear coat, and it carries the premium position in this lineup.

Specs

  • Diameter: 7-1/4 inch
  • Teeth: 60, ATB grind
  • Arbor: 5/8 inch
  • Kerf: .059 inch (thin kerf)
  • Plate: .040 inch
  • Hook angle: 10 degrees
  • Max RPM: 8,000
  • Published uses: ultra-fine finish cuts in plywood and finish material
  • Model: D0760A

Norske Tools NCSBP290 24-Tooth Framing Blade

The Norske NCSBP290 takes the budget slot. It is a 7-1/4 inch, 24-tooth thin-kerf framing blade made from Japanese steel, with a 5/8 inch bore and a diamond knockout for broader saw compatibility. Its distinguishing published feature is the Reversa Cut design: the blade is made to deliver extended cutting life, and the maker markets it with a double lifetime claim compared with a conventional framing blade.

The tooth count and thin kerf put it in the same working class as the other framing blades here, suited to ripping and crosscutting dimensional lumber and general site cutting. For a carpenter who goes through blades quickly on remodeling work, or who wants a serviceable spare in every truck, the value positioning is the point. It does not carry the premium carbide branding or coating story of the Diablo models, but on diameter, tooth count, arbor, and kerf it matches the standard framing pattern, and it is the budget tier option for straightforward framing duty.

Specs

  • Diameter: 7-1/4 inch
  • Teeth: 24
  • Arbor: 5/8 inch bore with diamond knockout
  • Kerf: thin kerf (published as thin kerf design)
  • Plate material: Japanese steel
  • Design: Reversa Cut thin-kerf framing blade
  • Published uses: framing and general wood cutting
  • Model: NCSBP290

UXACE 24-Tooth and 60-Tooth 2-Pack

The UXACE 2-pack covers both ends of a framing crew’s blade needs in one purchase: a 24-tooth blade for framing and a 60-tooth blade for ultra finish work. Both blades are 7-1/4 inch with a 5/8 inch arbor, carbide tips, and a thin kerf. The teeth use tungsten-cobalt carbide per the published listing, and the stated applications span plywood, MDF, OSB, and laminated material alongside framing lumber.

The logic of the pack mirrors the logic of this whole roundup. The 24-tooth blade handles the fast, rough work — rips, crosscuts in studs and plates, and sheathing cuts where speed matters more than edge quality. The 60-tooth blade swaps in when the cut will be visible or the material is prone to chipping, such as laminated panels and finish plywood. Buying the pair as a combo is a budget-tier way to cover both jobs, and it suits a solo carpenter or a DIY builder setting up a first saw kit.

Specs

  • Diameters: 7-1/4 inch (both blades)
  • Teeth: 24-tooth framing blade and 60-tooth ultra finish blade
  • Arbor: 5/8 inch
  • Kerf: thin kerf
  • Tooth material: tungsten-cobalt carbide, carbide tipped
  • Published uses: framing, plywood, MDF, OSB, laminated material
  • Pack contents: 2 blades
  • Model: 072460-2

How to Choose a Circular Saw Blade for Framing

Start with tooth count. Tooth count is the single biggest driver of cut speed and finish. Blades with 24 teeth are the framing standard: large gullets clear chips fast, so the blade rips and crosscuts dimensional lumber without bogging down, at the cost of a rougher edge. A 40-tooth blade cuts slightly slower and leaves a cleaner edge, suiting sheathing and mixed work. At 60 teeth, the cut is slower still but far cleaner, which is what finish material and veneered plywood need. Most framing carpenters own at least two of the three counts.

Match the diameter and arbor to the saw. Nearly all full-size handheld circular saws use a 7-1/4 inch blade on a 5/8 inch arbor, and every blade in this roundup follows that pattern. Some worm drive saws use a diamond-shaped arbor knockout, so check whether the blade includes one if that is your saw type. Compact saws use smaller diameters such as 6-1/2 inch, and blades do not interchange between sizes.

Consider kerf, especially on cordless saws. Kerf is the width of the cut the blade makes. Thin-kerf blades, like the .059 inch plates listed here, remove less material, so the saw works less hard and cordless runtime stretches further. Full-kerf plates resist deflection better in heavy cuts, but thin kerf is the common choice for handheld saws, and every blade in this group uses it.

Read the hook angle. A more aggressive hook angle, such as the 15 degrees published for the D0724X, pulls the blade into the cut and feeds faster, which suits framing. A milder angle, such as the 10 degrees on the 60-tooth blade, feeds more gently and helps control tear-out.

Factor in coatings and carbide. Non-stick coatings such as Perma-Shield are published to resist heat, pitch build-up, and corrosion, which matters most in pressure-treated and resinous lumber. Carbide grade names vary by maker — TiCo hi-density carbide and tungsten-cobalt carbide both appear in this roundup — and the practical point is that carbide teeth hold an edge far longer than plain steel teeth in construction lumber.

Match the blade to the material, and replace on time. A blade published for wood is not a metal or masonry blade, and forcing it through the wrong material ruins teeth quickly. When cuts start to burn, wander, or demand noticeably more feed pressure, the teeth are dull or damaged; on framing work, swapping in a fresh blade is usually faster than fighting a worn one.

FAQ

How many teeth should a framing blade have?

A 24-tooth blade is the standard for framing. The low tooth count and large gullets clear chips quickly in dimensional and pressure-treated lumber, which keeps cuts fast. Higher counts such as 40 or 60 teeth leave cleaner edges but cut more slowly, so they are better saved for sheet goods and finish material.

Can one blade handle both framing and plywood?

A 40-tooth general purpose blade is the usual compromise, and it is the role of the D0740A in this roundup. It rips framing lumber at a reasonable pace and leaves a much cleaner edge on plywood than a 24-tooth blade. For production framing plus finish-grade plywood cuts, a dedicated blade for each job gives better results than any single compromise blade.

Does thin kerf really matter on a cordless saw?

Yes, based on the published specifications. A thin-kerf blade removes less material with every pass, so the motor draws less power to make the same cut. On a cordless saw that reduced load translates into more cuts per charge, which is why thin-kerf blades dominate the 7-1/4 inch category.

When should a framing blade be replaced?

Replace it when cuts start burning the wood, the saw needs noticeably more feed pressure, edges come out rougher than the tooth count should produce, or any tooth is visibly chipped or missing. Nail-embedded lumber in demolition work shortens blade life sharply, so remodeling crews treat framing blades as consumables and keep spares on hand.

Conclusion

For most framing work, the Diablo D0724X is the blade to build a kit around: its published 24-tooth, thin-kerf, 15 degree hook specification is the framing pattern, listed for the pressure-treated and dimensional lumber that dominate site work. Add the D0740A when crosscuts and sheathing need a cleaner edge, and the D0760A when a circular saw has to produce finish-quality cuts in plywood and trim. The Norske NCSBP290 covers the budget end of framing duty, and the UXACE 2-pack covers both rough and finish cutting in a single purchase. Match tooth count to the cut, keep the arbor and diameter right for the saw, and every blade here will do the job it is published to do.

C
Carpenter's Equip Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.

Related guides

Browse all Uncategorized guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.